Engineering Materials Diffractometer
VULCAN | BL-7 | SNS
The following 525 publications were retrieved from PuSH (Publications of SNS and HFIR)
2026 21 Publications
Adhikari D., Quirinale D.G., Radyjowski P., Thurman Z., Yu D., Chen Y., An K., Mills R.A., Carlson D., Davis R.J., Chen C.H., "Automated rapid cooling of high-temperature vacuum furnaces for high throughput neutron experimentation", Review of Scientific Instruments, 97, 063303 (2026).
Allam H.N., "Load-Sharing Mechanisms in Metal Matrix Composites With Bimodal Reinforcement Sizes", Master's Thesis, Arizona State University (2026).
Amalia L., Lyu Z., Fan X., An K., Chen Y., Yu D., Burns J., Wen K., Sun B., Shen T., Liaw P.K., Gao Y.F., "Tangent moduli and successive hardening mechanisms: quantification from in situ neutron diffraction and ductility improvement of nanoprecipitation-strengthened HEAs", Materials Science and Engineering A, 961 , 150187 (2026).
An K., Chen Y., Frost M., "Residual stress distribution in an additively manufactured complex structure by neutron diffraction measurement", Materials Letters, 406, 139877 (2026).
Fu Z., Bulbule N.D., Jin Z., "Influence of Li-site dopants on phase stabilization, lithium distribution, and ionic conductivity in high-entropy Li-garnet solid electrolytes", Journal of Materials Chemistry A, 14, 10609-10622 (2026).
Guo X., Chen Y., Yu D., Wang H., "Aliovalent Anion Incorporation in Halide Na-ion Conductors for Enhanced Ionic Conductivity", ACS Energy Letters, 11, 3242–3249 (2026).
Halder R., "Process-Structure-Property Relationship in LHW-DED Ti-6Al-4V", Ph.D. Dissertation, Carnegie Mellon University (2026).
Haley J.C., Fancher C.M., Shankar G., Saleeby K., Kimmel C., Potter J., Tang W., An K., Yu D., Plotkowski A., "Infrared Triggered Dwell and Active Cooling Thermal Control Effects on Microstructural Uniformity in DED", Additive Manufacturing, 25, 105088 (2026).
Holtham N., Fernandez-Zelaia P., Fancher C.M., Ledford C., Brinkley F., Yu D., An K., Zhou N., Forsik S., Pollock T.M., Kirka M.M., "High-temperature mechanical properties of a γ′-strengthened Co-based superalloy designed for additive manufacturing", Scripta Materialia, 281, 117369 (2026).
Kim M., Roper C.M., An K., Brewer L.N., Kubacki G.W., "Mechanical Properties and Strengthening Mechanisms of Cold Sprayed Al-Mg Alloys", Materials Science and Engineering A, 960, 149461 (2026).
Kim Y.S., Woo W.C., Chae H., Lee T., Lee D.H., An K., Yu D., Chen Y., Lee S.Y., "Enhancement of mechanical properties in CoCrNi medium entropy alloy via ultra-cryoforging microstructural engineering", Journal of Alloys and Compounds, 1055, 186294 (2026).
Kumar P., Lam T.N., Lai J.S., Amalia L., Chou P.H., Yeh A., Kuo W.C., Liaw P.K., Chiang C., Hsieh W.Z., An K., Chen Y., Yu D., Shekhar Singh S., Huang E., "Synergy of cellular architecture and dual-precipitation on the high-cycle fatigue mechanisms of an additively manufactured high-entropy alloy: Al0.2Co1.5CrFeNi1.5Ti0.3", Materialia, 46, 102757 (2026).
Kumar P., Lam T.N., Luo M.Y., Amalia L., Lai J.S., Hsu S.T., An K., Chen Y., Yu D., Lee S.Y., Jain J., Liaw P.K., Chou P.H., Yeh A., Kuo W.C., Singh S.S., Huang E., "Dual-precipitates enhance fatigue resistance in an additively manufactured high-entropy alloy", Communications Materials, 7, 170 (2026).
Li C., Giri N.R., Jin Z., Chen Y., Fu Z., "Phase Stability and Electrochemical Performance of La-Site-Doped Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 High-Entropy Garnets", Inorganic Chemistry, 65, 2581-2590 (2026).
Liu C., Xie D., Gao Y.F., Zhang X., Zhong S., Wang H., An K., Liaw P.K., Peng Y., "Precipitation-strengthened micromechanical behaviors of magnesium alloy under cyclic loading", Journal of Magnesium and Alloys, 18, 101555 (2026).
Lu J., Zhang Y., Chen L., Chen Y., An K., Shoukry Y., Jin X., Wang Z.H., Mu S., Lei X., Huang K., "A new highly oxygen-deficient and cubic Pr3ZrO8-δ for intermediate-temperature thermochemical production of oxygen and hydrogen", Nature Communications, 17, 3091 (2026).
Song A.P., Tang A., Yu D., An K., "A Smart Vision-Aided RICH (Robotic Interface Control and Handling) System for VULCAN", Hardware, 4, 1 (2026).
Tang W., Giuliano D., Martinez O., Yu D., An K., Gussev M.N., Nycz A., Nogradi Jr P., "Neutron Diffraction Residual Stress Characterization of Large-Scale Components by WA-DED", Oak Ridge National Laboratory ORNL/TM-2026/4442 (2026).
Yang W., He J.Q., Zhou H., Yu C., Zhang Q., Chen J., Kato K., Wang C., Li W., Cao Y., Li Q., You L., Chen F., Lin K., Xing X., "Targeting Superior Zero Thermal Expansion Material by the Concept of TRIP-Invar", Advanced Functional Materials, 35, e22039 (2026).
Yang W., Zhou H., Chen J., Yu C., Cao Y., An K., Chen Y., Yu D., Lin K., Xing X., "Strength, ductility and zero thermal expansion in multicomponent TRIP-Invar alloys", International Journal of Minerals, Metallurgy and Materials, 33, 1329–1340 (2026).
Yu C., Wu H.H., Zhu H., Chen X., Gu L., Zhang Q., Zhang Q., Frontzek M., Chen Y., Chen Y., An K., He L., Kato K., Kawaguchi S., Qiao Z., Zhou M., Cao Y., Li Q., Deng J., Lin K., Xing X., "Atomic faulting drives exceptional toughness in low thermal expansion chromium alloys", Nature Communications, 17, 2435 (2026).
2025 36 Publications
Buioli C.P., Vicente Alvarez M.A., Vizcaino P., Chen Y., "Study of crystal deformation and inter-granular stress in cold rolled pressure tube material using neutron diffraction", Journal of Nuclear Materials, 605, 155595 (2025).
Chae H., Kim Y.S., Lee T., Woo W., An K., Choo H., Lee S.Y., "Quasi-reversibility of TWIP and TRIP of Fe-17Mn steel during low cycle fatigue", Materials Science and Engineering A, 924, 147793 (2025).
Chen T.C., Chen Y., Yu D., Amalia L., An K., "High-Temperature Neutron Diffraction Study of Vanadium and Vanadium-Niobium Null-Matrix Alloy for Spectrum Normalization", ACS Applied Materials & Interfaces, 3, 4668-4682 (2025).
Chen T.C., Tsay L.W., Chou C.C., Hsu S.C., "Enhancing the corrosion-wear resistance of HVOF-sprayed inconel 625 coatings via micro-shot peening", Surface and Coatings Technology, 517, 132801 (2025).
Chen Y., Yu D., An K., "What Is the Limit of Quantification for the Minor Phase in Time-of-Flight Neutron Diffraction? A Case Study on Fe and Ni Powder Mixtures at VULCAN", Crystals, 15, 934 (2025).
Chen Y., Yu D., An K., "Position-Dependent Neutron Time-of-Flight Deviation at VULCAN Diffractometer", Oak Ridge National Laboratory ORNL/TM-2025/4358 (2025).
Gao H., "Characterization and Understanding of Microstructure Transformation in Li-Ion Battery Recycling and Fast-Charging", Ph.D. Dissertation, University of California San Diego (2025).
Gao L., Chen Y., Zhang X., Agnew S.R., Chuang A.C., Sun T., "Evolution of dislocations during the rapid solidification in additive manufacturing", Nature Communications, 16, 4696 (2025).
Guo X., "Emerging Solid Electrolyte For Solid-State Sodium Batteries: Synthesis and Interface Study", Ph.D. Dissertation, University of Louisville (2025).
Halacoglu S., Guo X., Chen Y., Yu D., Narayanan B., Jasinski J.B., Wang H., "Synthesis and post-heating treatment of inorganic NaF·Na3SbS4 solid electrolytes", Nano Energy, 137, 110770 (2025).
Kim J.K., "Development of Refractory High Entropy Alloy via Natural Mixing Guided Design", Ph.D. Dissertation, Seoul National University (2025).
Lee C., Neelakandan D.P., Xie D., Li J., Wu C.Y., Huang A., Kang L., Xu S., Prorok B.C., Kim D.J., Meyers M.A., Xu H., Liaw P.K., Chou Y., An K., Gray III G.T., Li N., Song G., Fensin S.J., "Deformation Behaviors in Single BCC-Phase Refractory Multi-Principal Element Alloys under Dynamic Conditions", Advanced Science, 12, e08180 (2025).
Li C., Giri N.R., Chen Y., Soto F.A., Fu Z., "Yttrium Contenting Compositionally Complex Medium-Entropy Li-Garnet Electrolyte with Improved Ionic Conductivity", ACS Applied Materials & Interfaces, 17, 48267–48278 (2025).
Li Q., Ho H.P., Zeng Z., Wang Q., Dong K., Tantratian K., Chen L., Rousse G., Lu X., He K., Chen Y., Thieu N.A., Chen S., Chen X., Zhang D., Tian H., Wang Y., Ma L., Frost M., An K., Hu S., Li W., Li W., Manke I., Luo J., Wang J.H., Liu X., "Local structural distortion and energy gradient enhance lithium ionic conductivity in high-entropy oxide", Materials Today, 89, 26-34 (2025).
Lu H., Zhou C., Song Y., Zhang Y., Wu Y., Long F., Yao Y., Hao J., Chen Y., Yu D., Schwiedrzik J., An K., He L., Lu Z.P., Chen J., "A strategy to reduce thermal expansion and achieve higher mechanical properties in iron alloys", Nature Communications, 16, 211 (2025).
Lu J., "Novel Redox Oxygen Active Materials for Solid Oxide Cells and Thermochemical Hydrogen Production", Ph.D. Dissertation, University of South Carolina (2025).
Ma K., Cheng S., Ma X., Blackburn T., Knowles A.J., An K., Santisteban J., Sun F., Zenk C.H., Ferreiros P.A., "Lattice misfit design and characterisation in BCC superalloys", Scripta Materialia, 267, 116802 (2025).
Moustafa A.R., Cheng J., Allen J.P., Hu X., Shyam A., An K., Frost M., Chen Y., Splitter D., "Energy absorption of architectured PrintCast interpenetrating composites in tension", Additive Manufacturing, 103, 104769 (2025).
Park K., "Microstructure and mechanical properties at room and high temperatures of L21 precipitate-strengthened ferritic high-entropy alloy via thermomechanical processing", Ph.D. Dissertation, Kongju National University - Cheonan (2025).
Park K., Iftikhar H., Shin S., Jung Y., Lee K., Lee C., Song G., "Balanced mechanical properties of Al0.5CoCrFeNiTi0.1 high entropy alloy under extreme environments from cryogenic temperature to 800 °C", Journal of Alloys and Compounds, 1010, 178199 (2025).
Roper C.M., An K., Brewer L.N., "Quantifying Dislocation Density and Recrystallization Kinetics in Laser-Heated Cold Sprayed SS304L", Journal of Thermal Spray Technology, 34, 2656–2670 (2025).
Smith J., Kim H., An K., Chen Y., Dyck O., Reidy K., Chi M., "Unraveling Materials Synthesis Mechanisms Using In Situ Transmission Electron Microscopy and Neutron Scattering", Chemical Reviews, 125, 8731–8763 (2025).
Song A.P., An K., "Detector pixel calibration of time-of-flight neutron diffractometers accelerated by machine learning", Oak Ridge National Laboratory TM-2025/3948 (2025).
Song A.P., An K., "Fast and Accurate Pixel Calibration of Tof Neutron Diffractometers with Machine Learning", Quantum Beam Science, 10, 1 (2025).
Song A.P., Yu D., An K., "RICH (ROBOTIC INTERFACE CONTROL & HANDLING) SYSTEM FOR VULCAN", Oak Ridge National Laboratory TM-2025/3952 (2025).
Strain J., "Characterization of Structural Evolution as a Function of Alloy Composition, Strain Rate, and Heat Input for Precipitation Strengthened Aluminum Alloys Processed via Additive Friction Stir Deposition", Ph.D. Dissertation, University of Alabama Tuscaloosa (2025).
Tang A., An K., "Integrating Machine-learning-assisted Computer Vision with RICH System", Oak Ridge National Laboratory TM-2025/3957 (2025).
Venkatakrishnan S.V., An K., Lee Y., Feldhausen T., Heinrich L., DeWitt S., "Simulation driven adaptive sampling for neutron-diffraction based strain mapping of additively manufactured parts", Machine Learning: Science and Technology, 6, 045037 (2025).
Wang H., Lee S.Y., Kim Y.S., Wang H., Woo W.C., An K., "Solid solution dependence of the deformation behavior in Mg-xZn (x = 0, 1, 2 wt%) alloys: In-situ neutron diffraction and crystal plasticity modeling", Journal of Magnesium and Alloys, 13, 823-838 (2025).
Yadav A., Wen Y., Yang X., Yu D., Chen Y., Huang K., "High Oxide-ion Conductivity in Cubic Perovskite Na- and Ga-doped BaZrO3", Solid State Ionics, 429, 116976 (2025).
Yang Y., Wang Y., Fan X., Amalia L., An K., "CREEP PROPERTY OF INTERMETALLIC DISPERSIVE STEELS FOR NUCLEAR APPLICATIONS", Oak Ridge National Laboratory TM-2025/4270 (2025).
Yu D., Chen T.C., Chen Y., An K., "Wavelength Scan Results of VULCAN Chopper", Oak Ridge National Laboratory TM-2025/4350 (2025).
Yu D., Chen Y., Skorpenske H.D., An K., "A Compact Cryogenic Environment for In Situ Neutron Diffraction Under Mechanical Loading", Quantum Beam Science, 9, 36 (2025).
Zhang L., Gao H., Zhu Y., Tran I., Tang W., Lin J.Y., Mu A.U., Wu J., Li W., Nordlund D., Mu L., Chen Z., "Unveiling the Role of Critical Impurities in Spent LiFePO4 Cathodes for Scalable Direct Regeneration", Advanced Energy Materials, 15, 2406084 (2025).
Zhou H., Shen Y., Cao Y., Yang W., Sun X., Yu C., Lin K., Xing X., "A Kagome Metallic Composite Realizes Mechanically Axial Zero Thermal Expansion up to 800 K", Advanced Materials, 37, 5529–5546 (2025).
Zhu N., Hickok T., Fraser K.A., Yu D., Chen Y., An K., Brewer L.N., Allison P.G., Jordon J.B., "Neutron diffraction analysis of residual stress distribution in the lubricant-free TR-AFSD AA7075 repair coupled with SPH simulations", Journal of Advanced Joining Processes, 11, 100283 (2025).
2024 33 Publications
Ai M., Song Y., Long F., Zhang Y., An K., Yu D., Chen Y., Sakai Y., Ikeda M., Takahashi K., Azuma M., Shi N., Zhou C., Chen J., "Significantly Promoting the Thermal Conductivity and Machinability of Negative Thermal Expansion Alloy via In Situ Precipitation of Copper Networks", Advanced Science, 11, 2404838 (2024).
Amalia L., Li Y., Bei H., Chen Y., Yu D., An K., Lyu Z., Liaw P.K., Zhang Y., Ding Q., Gao Y.F., "Copper effects on the microstructures and deformation mechanisms of CoCrFeNi high entropy alloys", Applied Physics Letters, 124, 14, 141901 (2024).
Bahl S., Wu T., Michi R.A., An K., Yu D., Allard L.F., Rakhmonov J.U., Poplawsky J., Fancher C.M., Dunand D.C., Plotkowski A., Shyam A., "An additively manufactured near-eutectic Al-Ce-Ni-Mn-Zr alloy with high creep resistance", Acta Materialia, 268, 119787 (2024).
Buck Z.N., Martin M.L., Lauria D., Killgore J.P., Bradley P., Chen Y., An K., Connolly M.J., "Effects of hydrogen on the evolution of 4130 steel microstructure as a result of tensile loading", International Journal of Hydrogen Energy, 136, 643-650 (2024).
Chen Y., Yu D., An K., "A Portable Miniature Cryogenic Environment for In Situ Neutron Diffraction", Crystals, 14, 640 (2024).
Fan X., "Phase Engineering of High-entropy Alloys through Transformations", Ph.D. Dissertation, University of Tennessee (2024).
Feng R., Hung C.Y., Antonov S., Poplawsky J., An K., Jablonski P.D., Detrois M., "Variations in γ′ formers and refractory elements for enhanced creep resistance and phase stability of an advanced Ni-based superalloy", Materials Advances, 5, 8847-8863 (2024).
Gao H., Han B., Tran D., Zhang L., Zhao Z., Chen Y., Tang W., Xu M., Wu J., Yu X., Gupta V., Appleberry M., Liu H., Yin Y., Yao W., Li M., Li W., Mu L., Meng Y.S., Chen Z., "Understanding and Controlling Structural Defects and Disordering in LiNi0.5Mn1.5O4 Cathodes for Direct Recycling", ACS Nano, 18, 30737–30748 (2024).
Guo X., Halacoglu S., Chen Y., Wang H., "Recent Progress on Dominant Sulfide-Type Solid-State Na Superionic Conductors for Solid-State Sodium Batteries", Small, 20, 2311195 (2024).
Halacoglu S., "Synthesis and doping effects in highly conductive chalcogenide solid electrolytes", Ph.D. Dissertation, University of Louisville (2024).
Hu X., Cheng J., Nawaz K., Kesler M.S., Chen Y., An K., "Utilizing integrated neutron diffraction and elastoplastic self-consistent crystal plasticity model to quantitatively assess the strengthening mechanism in Al-12.5Ce and Al-12.5Ce-0.4Mg alloys", Modelling and Simulation in Materials Science and Engineering, 32, 055019 (2024).
Huang S., An K., Shen C., Schuster M., Spinelli I., Drobnjak M., Kitt A.L., "The 650 °C Tensile Deformation of Graded IN718-René 41 Superalloy Fabricated by Laser Blown-Powder Directed Energy Deposition", Metals, 14, 950 (2024).
Kim J., "Tailoring Shape Memory Alloy Characteristics through Complex Defect Engineering", Ph.D. Dissertation, Seoul National University (2024).
Kim Y.S., Luo M.Y., Yu D., An K., Chen Y., Oh I.H., Shin E., Woo W.C., Chae H., Na Y.S., Liaw P.K., Jain J., Han J.H., Huang E., Lee S.Y., "Enhancing the fatigue resistance of high and medium entropy alloys by manufacturing-driven microstructural developments", Additive Manufacturing, 91, 104332 (2024).
Li Y., Hou P., Kamath R., Feng Z., An K., Choo H., "Real-time evolution of texture and temperature during friction stir processing of a magnesium alloy: an operando neutron diffraction study", Acta Materialia, 270, 119842 (2024).
Lu J., Zhang Y., Wen Y., Yu D., Chen Y., An K., Huang K., "Understanding Why SrCo0.9Ta0.1O3-δ is a Better Perovskite Oxygen Electrocatalyst than BaCo0.9Ta0.1O3-δ", Journal of Physical Chemistry C, 128, 17252–17260 (2024).
Lyu Z., Liu C., Xie ., Feng R., Yu D., Chen Y., An K., Gao Y.F., Wang H., Liaw P.K., "Low cycle fatigue performances of Al0.3CoCrFeNi high entropy alloys: In situ neutron diffraction studies on the precipitation effects", Intermetallics, 168, 108241 (2024).
Mooraj S., Kim G., Fan X., Samuha S., Xie Y., Li T., Tiley J., Chen Y., Yu D., An K., Hosemann P., Liaw P.K., Chen W., Chen W., "Additive manufacturing of defect-free TiZrNbTa refractory high-entropy alloy with enhanced elastic isotropy via in-situ alloying of elemental powders", Communications Materials, 5, 14, (2024).
Orr M., "Exploring Solid-State Reaction Pathways and Physical Properties of Rare-Earth Oxychalcogenides", Ph.D. Dissertation, University of Texas at Arlington (2024).
Parascos K., "Control Of Structural, Physical and Electrochemical Properties of Garnet Solid Electrolytes", Ph.D. Dissertation, Queensland University of Technology (2024).
Pei B., Zhou H., Zong Y., Chen X., Zuba M.J., Zhou G., Liu H., Whittingham M.S., "Fatigue Phase Suppression in Aged High Nickel Layered Cathodes by Aluminum Substitution during Co-precipitation", ACS Energy Letters, 9, 3913-3921 (2024).
Preimesberger J.I., Chen Y., An K., Arnold C.B., "Understanding the effect of cycling lithium-ion pouch cells under stress using neutron diffraction", Journal of Power Sources, 598, 234114 (2024).
Qu M., Yu D., Chen L., An K., Chen Y., "Understanding the High-Temperature Deformation Behaviors in Additively Manufactured Al6061+TiC Composites via In Situ Neutron Diffraction", Metals, 14, 1064 (2024).
Qu M., Yu D., Yuan J., Chen L., An K., Chen Y., "Multi-stage load partitioning in additively manufactured Al6061+TiC nanocomposite characterized by in-situ neutron diffraction\u2606", Additive Manufacturing, 96, 104584 (2024).
Roper C.M., Williamson C.J., An K., Brewer L.N., "Martensite Formation and Dynamic Recrystallization in Cold Sprayed SS304L", Journal of Thermal Spray Technology, 33, 1955–1967 (2024).
Trinh L., Wang F., Bawane K., Hattar K., Hua Z., Malakkal L., He L., Wadle L., Lu Y., Cui B., "Compositionally complex carbide ceramics: A perspective on irradiation damage", Journal of Applied Physics, 135, 200901 (2024).
Wang X., Fu Y., Wang J., Wang J., Zhang F., Ruan H., Wu Y., Wu Y., "Crystalline-Amorphous-Crystalline Two-Step Phase Transformation and the Resulting Supra-nano Structure in a Metastable Iron-based Alloy", Acta Materialia, 266, 119690 (2024).
Wen K., Cai X., Xin S., Sun B., Feng R., Du C., Zhu H., An K., Ding S., Meng F., Yuan Z., Wu Y., Bai Z., Liaw P.K., Shen T., "Discovery of a novel low-cost medium-entropy stainless steel with exceptional mechanical behavior over a wide temperature range", Matter, 7, 3625-3644 (2024).
Wu T., "Creep-Resistant Aluminum-Cerium Based Eutectics Alloys via Casting and Laser Powder-Bed Fusion", Ph.D. Dissertation, Northwestern University (2024).
Ying H., Yang X., He H., Yan A., An K., Ke Y., Wu Z., Tang S., Zhang Z., Dong H., Harjo S., Ungar T., Zhu H., Sun Q., Wang X.L., Lan S., "Anomalous dislocation response to deformation strain in CrFeCoNiPd high-entropy alloys with nanoscale chemical fluctuations", Scripta Materialia, 250, 116181 (2024).
Yu C., Lin K., Zhang Q., Zhu H., An K., Chen Y., Yu D., Li T., Fu X., Yu Q., You L., Kuang X., Cao Y., Li Q., Deng J., Xing X., "An isotropic zero thermal expansion alloy with super-high toughness", Nature Communications, 15, 2252 (2024).
Yu D., Chen Y., Conner D., Berry K.D., Skorpenske H.D., An K., "Effect of Collimation on Diffraction Signal-to-Background Ratios at a Neutron Diffractometer", Quantum Beam Science, 8, 14 (2024).
Yu D., Guo C., Fu S., Chen Y., An K., Yu W., Chen X., "Probing the fatigue enhancement in a thermally aged cast duplex stainless steel by in situ neutron diffraction", Scripta Materialia, 252, 116252 (2024).
2023 39 Publications
Buck Z.N., Connolly M.J., Martin M.L., Lauria D., Killgore J.P., Bradley P., Chen Y., An K., Slifka A., "Effects of mechanical deformation on dislocation density and phase partitioning in 4130 steel", Materials Science and Engineering A, 885, 145592 (2023).
Chen Y., Cernatescu I., Venkatesh V., Stoica A.D., An K., "On the residual stress relaxation in Inconel 718 superalloys at high temperature by real-time neutron diffraction", Materials & Design, 232, 112135 (2023).
Chen Y., Lee K., An K., Yu D., Zhou H., Whittingham M.S., "Neutron diffraction probing hydrogen in monoclinic H2VOPO4", Materials Letters, 348, 134661 (2023).
Field D.M., Magagnosc D.J., Hornbuckle B.C., Lloyd J.T., Limmer K.R., "Manipulation of the Stacking Fault Energy of a Medium-Mn Steel Through Temperature and Hierarchical Compositional Variation", Metallurgical and Materials Transactions A, 55, 161–172 (2023).
Gao H., Yan Q., Tran D., Yu X., Liu H., Li M., Li W., Wu J., Tang W., Gupta V., Luo J., Chen Z., "Upcycling of Spent LiNi0.33Co0.33Mn0.33O2 to Single-Crystal Ni-Rich Cathodes Using Lean Precursors", ACS Energy Letters, 8, 10, 4136-4144 (2023).
Hu L., Duan C., Zhu J., Zhu J., Wang J., Wang K., Gu Z., Xi Z., Hao J., Chen Y., Ma J., Liu J.X., Ma C., "Revealing the Pnma crystal structure and ion-transport mechanism of the Li3YCl6 solid electrolyte", Cell Reports Physical Science, 4, 101428 (2023).
Hua Y., Huang Z., Li S., Chen S., He X., Liu H., Feng J., "Unraveling the Correlation between the Synthesis Time and Electrochemical Performance of Transition Metal Layered Oxides by In Situ Neutron Powder Diffraction", ACS Applied Energy Materials, 6, 6563-6571 (2023).
Iverson E.B., "Comparison of the Neutronic Performance of IRP-1 and IRP-2 at SNS", Department of Energy ORNL/TM-2022/2702 (2023).
Kong W., Zhou D., Zhang Q., Wong D., An K., Schulz C., Zhang N., Zhang J., Liu X., "Adjusting the Redox Coupling Effect via Li\/Co Anti-Site Defect for Stable High-Voltage LiCoO2 Cathode", Advanced Functional Materials, 33, 8, 2211033 (2023).
Kumar P., Lai J.S., Tripathi P.K., Singh S.S., An K., Huang E., "Structural transformations in additively manufactured high entropy alloy under low-cycle fatigue loading", Asia-Oceania Conference on Neutron Scattering (AOCNS), (2023).
Lai J.S., "Precipitate Strengthening on Tensile & Fatigue Properties in Additive Manufactured Al0.2Co1.5CrFeNi1.5Ti0.3 High Entropy Alloy", Master's Thesis, National Yang Ming Chiao Tung University (2023).
Lin K., Zhang W., Yu C., Sun Q., Cao Y., Li W., Jiang S.H., Li Q., Zhang Q., An K., Chen Y., Yu D., Liu J., Kato K., Gu L., Kuang X., Tang Y., Miao J., Xing X., "Chemical heterogeneity modulated zero thermal expansion alloy over super-wide temperature range", Cell Reports Physical Science, 4, 101254 (2023).
Liu Y., Ren J., Guan S., Li C., Zhang Y., Muskeri S., Liu Z., Yu D., Chen Y., An K., Cao Y., Liu W., Zhu Y., Chen W., Mukherjee S., Zhu T., "Microstructure and mechanical behavior of additively manufactured CoCrFeMnNi high-entropy alloys: Laser directed energy deposition versus powder bed fusion", Acta Materialia, 250, 118884 (2023).
Lyu Z., Li Z., Sasaki T., Gao Y.F., An K., Chen Y., Yu D., Hono K., Liaw P.K., "Micromechanical origin for the wide range of strength-ductility trade-off in metastable high entropy alloys", Scripta Materialia, 231, 115439 (2023).
Michi R.A., Bahl S., Fancher C.M., Sisco K., Allard L.F., An K., Yu D., Dehoff R.R., Plotkowski A., Shyam A., "Load shuffling during creep deformation of an additively manufactured AlCuMnZr alloy", Acta Materialia, 244, 118557 (2023).
Mooraj S., "Additive Manufacturing of Multicomponent Metal Alloys", Ph.D. Dissertation, University of Massachusetts Amherst (2023).
Muhammad A., "Microstructure Evolution and Deformation Micromechanisms of Nickel and Refractory Superalloys", Ph.D. Dissertation, University of Miami (2023).
Parascos K., Watts J.L., Alarco J.A., Chen Y., Talbot P.C., "Optimizing Li+ transport in Li7La3Zr2O12 solid electrolytes", Ceramics International, 49, 23082-23090 (2023).
Plotkowski A., Saleeby K., Fancher C.M., Haley J.C., Madireddy G., An K., Kannan R., Feldhausen T., Lee Y., Yu D., Leach C., Vaughan J., Babu S.S., "Operando neutron diffraction reveals mechanisms for controlled strain evolution in 3D printing", Nature Communications, 14, 4950, (2023).
Puplampu S.B., Penumadu D., Frost M., An K., "Neutron Diffraction Measurements Of Forged Ti-6A-4V Alloy Under Tensile Loading", Advanced Engineering Materials, 25, 1, 2200793 (2023).
Rakhmonov J.U., Milligan B., Bahl S., Ma D., Shyam A., Dunand D.C., "Progression of creep deformation from grain boundaries to grain interior in Al-Cu-Mn-Zr alloys", Acta Materialia, 250, 118886 (2023).
Ren J., "Additive Manufacturing of High-Performance Nanolamellar Eutectic High-Entropy Alloys", Ph.D. Dissertation, University of Massachusetts Amherst (2023).
Ren J., Wu M., Li C., Guan S., Dong J., Forien J.B., Li T., Shanks K.S., Yu D., Chen Y., An K., Xie K.Y., Voisin T., Chen W., Chen W., "Deformation mechanisms in an additively manufactured dual-phase eutectic high-entropy alloy", Acta Materialia, 257, 119179, (2023).
Rodriguez-Gomez M., Campo J., Orera A., Fuente F.D., Valenciano J., Fricke H., Hussey D.S., Chen Y., Yu D., An K., Larrea A., "Operando analysis of the positive active mass of lead batteries by neutron diffraction", Journal of Power Sources, 591, 233822 (2023).
Roper C.M., "Microstructure and Mechanical Properties of Laser Heated Cold Spray SS304L", Ph.D. Dissertation, University of Alabama Huntsville (2023).
Sobhani B.A., Chen Y., "Real-Time Visualization and Peak Fitting of Time-of-Flight Neutron Diffraction at VULCAN", 19th International Conference on Accelerator and Large Experimental Physics Control Systems, (2023).
Venkatakrishnan S.V., Fancher C.M., Ziatdinov M., Vasudevan R.K., Saleeby K., Haley J.C., Yu D., An K., Plotkowski A., "Adaptive Sampling for Accelerating Neutron Diffraction-Based Strain Mapping", Machine Learning: Science and Technology, 4, 025001 (2023).
Vodopivec K., Vacaliuc B., "Deployment of ADTimePix3 areaDetector Driver at Neutron and X-ray User Facilities", 16th Int. Conf. on Accelerator and Large Experimental Control Systems, (2023).
Wischhusen M., "Dual-Phase, Compositionally Complex Alloys: An Exploration of L21 Heusler-Phase Reinforcement", Ph.D. Dissertation, University of Virginia (2023).
Wissink M., Wray C.L., Lee P.M., Hoffmeyer M.M., Frost M., An K., Chen Y., "The Neutronic Engine: A Platform for Operando Neutron Diffraction in Internal Combustion Engines", SAE International Journal of Engines, 17, 2, 269-305 (2023).
Woo W.C., Kim Y., Chae H., Lee S.Y., Jeong J.S., Lee C.M., Won J.W., Na Y.S., Kawasaki T., Harjo S., An K., "Competitive strengthening between dislocation slip and twinning in cast-wrought and additively manufactured CrCoNi medium entropy alloys", Acta Materialia, 246, 118699 (2023).
Xie D., Li Z., Sasaki T., Gao Y.F., Lyu Z., Feng R., Chen Y., An K., Chew H.B., Nakata T., Kamado S., Hono K., Liaw P.K., "Identifying the effect of coherent precipitates on the deformation mechanisms by in situ neutron diffraction in an extruded magnesium alloy under low-cycle fatigue conditions", Acta Materialia, 251, 118903 (2023).
Yan Z., Srikakulapu K., Gao Y., Qin H., Rong Y., Bi Z., Xie Q., An K., Wang Y.D., Tan Q., "γ′-size effect on the deformation microstructure and texture in a Ni-based superalloy using in-situ neutron diffraction", Scripta Materialia, 236, 115665 (2023).
Yu C., "Preparation, strengthening and toughening of rare-earth- based zero thermal expansion alloys", Ph.D. Dissertation, University of Science and Technology Beijing (2023).
Yu C., Lin K., Chen X., Jiang S.H., Cao Y., Li W., Chen L., An K., Chen Y., Yu D., Kato K., Zhang Q., Gu L., You L., Kuang X., Wu H., Li Q., Deng J., Xing X., "Superior zero thermal expansion dual-phase alloy via boron-migration mediated solid-state reaction", Nature Communications, 14, 3135 (2023).
Yu Y., Zhang J., Gao R., Wong D., An K., Zheng L., Zhang N., Schulz C., Liu X., "Triggering reversible anion redox chemistry in O3-type cathodes by tuning Na\/Mn anti-site defects", Energy & Environmental Science, 16, 2, 584-597 (2023).
Zhang D., Chen Y., Vega H., Feng T., Yu D., Everett S.M., Neuefeind J., An K., Chen R., Luo J., "Long- and short-range orders in 10-component compositionally complex ceramics", Advanced Powder Materials, 2, 100098 (2023).
Zhang J., Wong D., Zhang Q., Zhang N., Schulz C., Bartkowiak M., An K., Gu L., Hu Z., Liu X., "Reducing Co\/O Band Overlap through Spin State Modulation for Stabilized High Capability of 4.6 V LiCoO2", Journal of the American Chemical Society, 145, 18, 10208-10219 (2023).
Zhong W., Hayakawa S., Xu H., An K., Borisevich A.Y., Cicotte J.L., George E.P., Yang Y., "Deciphering the multiple deformation mechanisms responsible for sustained work hardening in a FeCrCoNi medium entropy alloy", International Journal of Plasticity, 167, 103663 (2023).
2022 54 Publications
An K., Stoica A.D., Huegle T., Lin J.Y., Graves V.B., "MENUS—Materials engineering by neutron scattering", Review of Scientific Instruments, 93, 053911 (2022).
Brooks A.J., Hussey D.S., Ham K., Jacobson D.L., Manke I., Kardjilov N.D., Butler L.G., "Intact, Commercial Lithium-Polymer Batteries: Spatially Resolved Grating-Based Interferometry Imaging, Bragg Edge Imaging, and Neutron Diffraction", Applied Sciences, 12, 1281 (2022).
Brugger A., Lee S.Y., Robinson J., Morgantini M., Betti R., Noyan I.C., "Internal Contact Mechanics of 61-Wire Cable Strands", Experimental Mechanics, 62, 1475–1488 (2022).
Cakmak E., Gussev M.N., Cinbiz M.N., Field K.G., An K., "Micromechanical aspects of deformation and failure of advanced Iron-Chromium-Aluminum alloys", Materialia, 26, 101592 (2022).
Chen Y., An K., "Unraveling transition-metal-mediated stability of spinel oxide via in situ neutron scattering", Journal of Energy Chemistry, 68, 60-70 (2022).
Feng R., An K., Liaw P.K., "Fatigue Behavior and Mechanisms of High-Entropy Alloys", High Entropy Alloys & Materials, 1, 4-24 (2022).
Feng R., Kim G., Yu D., Chen Y., Chen W., Liaw P.K., An K., "Elastic behavior of binary and ternary refractory multi-principal-element alloys", Materials & Design, 219, 110820 (2022).
Gao H., Yan Q., Holoubek J., Yin Y., Bao W., Liu H., Baskin A., Li M., Cai G., Li W., Tran D., Liu P., Luo J., Meng Y.S., Chen Z., "Enhanced Electrolyte Transport and Kinetics Mitigate Graphite Exfoliation and Li Plating in Fast-Charging Li-Ion Batteries", Advanced Energy Materials, 13, 2202906 (2022).
Gao P., Li F., An K., Zhao Z., "Experimental and Modeling Study of Phase-Specific Flow Stress Distribution in Intercritically Annealed Quenching and Partitioning Steels", Crystals, 12, 1412 (2022).
Gao P., Li F., An K., Zhao Z., Chu X., Cui H., "Microstructure and deformation mechanism of Si-strengthened intercritically annealed quenching and partitioning steels", Materials Characterization, 191, 112145 (2022).
Guo X.Q., Cheng Y., Xin Y., Wu W., Ma C., An K., Liaw P.K., Wu P.D., Liu Q., "Crystal plasticity modeling of low-cycle fatigue behavior of an Mg-3Al-1Zn alloy based on a model, including twinning and detwinning mechanisms", Journal of the Mechanics and Physics of Solids, 168, 105030 (2022).
He X., Wu J., Zhu Z., Liu H., Li N., Zhou D., Hou X., Wang J., Zhang H., Bresser D., Fu Y., Crafton M.J., McCloskey B., Chen Y., An K., Liu P., Jain A., Li J., Yang W., Yang Y., Winter M., Kostecki R., "Chemical and structural evolution of Li-Mn-rich layered electrodes under different current densities", Energy & Environmental Science, 15, 10, 4137-4147 (2022).
Hsiao H., Feng R., Ni H., An K., Poplawsky J., Liaw P.K., Zuo J., "Data-driven electron-diffraction approach reveals local short-range ordering in CrCoNi with ordering effects", Nature Communications, 13, 6651 (2022).
Huang A., Liu H., Liu P., Friend J., "Overcoming the Intrinsic Limitations of Fast Charging Lithium-Ion Batteries Using Integrated Acoustic Streaming", Advanced Energy and Sustainability Research, 4, 2200112 (2022).
Huang S., Dolley E., An K., Yu D., Crawford C., Othon M.A., Spinelli I., Knussman M.P., Rebak R.B., "Microstructure and tensile behavior of powder metallurgy FeCrAl accident tolerant fuel cladding", Journal of Nuclear Materials, 560, 153524 (2022).
Huang S., Shen C., An K., Zhang Y., Spinelli I., Brennan M., Yu D., "Residual stress and microstructure in IN718-René 41 graded superalloy fabricated by laser blown directed energy deposition", Frontiers in Metals and Alloys, 1, 1070562 (2022).
Jiang S., Lin Peng R., Zhao X., Zuo L., Jia N., "Deformation incompatibility enables hetero-deformation induced strengthening in Ti\/Nb laminates", Materials Research Letters, 11, 2, 126-133 (2022).
Jiang S., Peng R.L., An K., Yan H.L., Zhao X., Zuo L., Cui W.B., Esling C., Jia N., "Unraveling dislocation-type evolution dominated strain hardening in laminated Ti\/Nb composites", Materials Science and Engineering A, 851, 143620 (2022).
Kong W., "Performance regulation and structural failure analysis for high voltage LiCoO2 cathode materials", Ph.D. Dissertation, University of Chinese Academy of Science (2022).
Kong W., Wong D., An K., Zhang J., Chen Z., Schulz C., Xu Z., Liu X., "Stabilizing the Anionic Redox in 4.6 V LiCoO2 Cathode through Adjusting Oxygen Magnetic Moment", Advanced Functional Materials, 32, 31, 2202679 (2022).
Lam T.N., Wu Y.H., Liu C.J., Chae H., Lee S.Y., Jain J., An K., Huang E., "Transient Phase-Driven Cyclic Deformation in Additively Manufactured 15-5 PH Steel", Materials, 15, 777 (2022).
Lee C., Song G., Gao M.C., Ouyang L., An K., Fensin S.J., Liaw P.K., "Effects of Zr addition on lattice strains and electronic structures of NbTaTiV high-entropy alloy", Materials Science and Engineering A, 831, 142293 (2022).
Lee T., Chae H., Shin S., Cho S., Lee S.K., Lee S.Y., An K., Ryu H.J., "Overcoming brittleness of high volume fraction Al\/SiCp composites by controlling interface characteristics", Materials & Design, 222, 111038 (2022).
Li F., "Microstructure and properties regulation and mechanical behavior of high strength high-manganese TRIP steel", Ph.D. Dissertation, University of Science and Technology Beijing (2022).
Li F., Gao P., Chen Y., Li C., Shang X., Wan P., Chen W., Kang T., Zhao Z., An K., "In-situ neutron diffraction investigation of two-stage martensitic transformation in a 13%Mn steel with serrated deformation", Materials Science and Engineering A, 840, 142955 (2022).
Li Q., Ning D., Wong D., An K., Tang Y., Zhou D., Schuck G., Chen Z., Zhang N., Liu X., "Improving the oxygen redox reversibility of Li-rich battery cathode materials via Coulombic repulsive interactions strategy", Nature Communications, 13, 1123 (2022).
Li W., "Zero thermal expansion and environmental stability in ThMn12- and Laves-based compounds", Ph.D. Dissertation, University of Science and Technology Beijing (2022).
Li W., Lin K., Yan Y., Yu C., Cao Y., Chen X., Wang C., Kato K., Chen Y., An K., Zhang Q., Gu L., Li Q., Deng J., Xing X., "Seawater Corrosion Resistant and Isotropic Zero Thermal Expansion (Zr, Ta)(Fe, Co)2 Alloy", Advanced Materials, 34, 2109592 (2022).
Li Z., Guan B., Xia F., Nie J., Ma L., Li W., Li W., Zhou L., Wang Y., Tian H., Luo J., Chen Y., Frost M., An K., Liu X., "High-Entropy Perovskite as a High-Performing Chromium-Tolerant Cathode for Solid Oxide Fuel Cells", ACS Applied Materials & Interfaces, 14, 21, 24363–24373 (2022).
Lyu Z., "Synergistic Fatigue Performance in High Entropy Alloys with Novel Precipitates and Metastable Phases", Ph.D. Dissertation, University of Tennessee (2022).
Magagnosc D.J., Field D.M., Meredith C.S., An K., Walter T.R., Limmer K.R., Lloyd J.T., "Temperature and Stress Dependent Twinning Behavior in a Fully Austenitic Medium-Mn Steel", Acta Materialia, 231, 117864 (2022).
Parascos K., Watts J.L., Alarco J.A., Chen Y., Talbot P.C., "Compositional and structural control in LLZO solid electrolytes", RSC Advances, 12, 23466-23480 (2022).
Peterson N., "Towards a Better Understanding of Phase Transformations in Uranium Alloys Through the Use of Scattering Techniques", Ph.D. Dissertation, University of Virginia (2022).
Peterson N., Fancher C.M., Frontzek M., Bunn J.R., Payzant E.A., An K., Agnew S.R., "Quantitative texture analysis at the WAND2 and HIDRA diffractometers", Journal of Applied Crystallography, 55, 1432-1445 (2022).
Preimesberger J.I., "Studying the Piezoelectrochemical Phenomenon Using Lithium-ion Batteries", Ph.D. Dissertation, Princeton University (2022).
Ren J., Zhang Y., Zhao D., Chen Y., Guan S., Liu Y., Liu L., Peng S., Kong F., Poplawsky J., Gao G., Voisin T., An K., Wang Y.M., Xie K.G., Zhu T., Chen W., "Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing", Nature, 608, 62-68 (2022).
Robinson J., "Experimental and Numerical Investigations of the Thermomechanical Properties of Suspension Bridge Main Cables", Ph.D. Dissertation, Columbia University (2022).
Sofras C., Capek J., Arabi-Hashemi A., Leinenbach C., Frost M., An K., Loge R.E., Strobl M., Polatidis E., "Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with Laser-Powder Bed Fusion", Materials & Design, 219, 110789 (2022).
Srinivasan R., "Neutron Diffraction Study Of Phase Transitions And Investigation Of Mesoporous-Columnar Si Electrodes For Li-ion Batteries", Ph.D. Dissertation, University of Utah (2022).
Srinivasan R., Chandran K.S., Chen Y., An K., "In-Operando Neutron Diffraction Investigation of Structural Transitions during Lithiation of Si Electrode in Li-Ion Battery", Journal of the Electrochemical Society, 169, 100545 (2022).
Sun F., Wang S., Xie Q., "Role of particles and lattice rotation in tension-compression asymmetry of aluminium alloys", International Journal of Plasticity, 103464 (2022).
Tang W., Fancher C.M., Nandwana P., An K., Nycz A., Wang H., Kannan R., Trofimov A.A., Yu D., Leonard D.N., Meyer L., Plotkowski A., "Temperature-Dependent Thermal and Mechanical Properties of a Wire Arc Additively Manufactured Low Transformation Temperature Steel", Metallurgical and Materials Transactions A, 54, 854-868 (2022).
Tanji A., Fan X., Sakidja R., Liaw P.K., Hermawan H., "Niobium addition improves the corrosion resistance of TiHfZrNbx high-entropy alloys in Hanks' solution", Electrochimica Acta, 424, 140651 (2022).
Wang H., Zhang X., Wu W., Liaw P.K., An K., Yu Q., Wu P.D., "On the torsional and coupled torsion-tension\/compression behavior of magnesium alloy solid rod: a crystal plasticity evaluation", International Journal of Plasticity, 151, 103213 (2022).
Wang Y.W., Makrygiannis P., Wu W., Tiji S., Zhu F., Zhang J., Thomas G., An K., "Deformation Mode and Strain Path Dependence of Martensite Phase Transformation in QP980 Steel", Journal of Materials Engineering and Performance, (2022).
Xie Q., Yan Z., Yu D., An K., Yan X., Yin S., Gillham B., Wu X., Yang P., Zhao Z., Wang Y.D., "Crystallographic orientation and spatially resolved damage for polycrystalline deformation of a high manganese steel", Acta Materialia, 226, 117628 (2022).
Yang H., An K., Wang Y.D., "Anomalous high-temperature quasi-linear superelasticity of Ni-Fe-Ga-Co shape memory alloy", Journal of Alloys and Compounds, 909, 164808 (2022).
Yoon K.N., "Development of Self-healable Co-based superalloys", Ph.D. Dissertation, Seoul National University (2022).
Yu C., Lin K., Cao Y., Li W., Chen Y., An K., Wang C., Kato K., Li Q., Deng J., Xing X., "Two-dimensional zero thermal expansion in low-cost MnxFe5-xSi3 alloys via integrating crystallographic texture and magneto-volume effect", Science China Materials, 65, 1912–1919 (2022).
Zhang D., Chen Y., Feng T., Yu D., An K., Chen R., Luo J., "Discovery of a reversible redox-induced order-disorder transition in a 10-component compositionally complex ceramic", Scripta Materialia, 215, 114699 (2022).
Zhang W., "Concentration wave regulates thermal expansion in magnetic Laves phase alloys", Master's Thesis, University of Science and Technology Beijing (2022).
Zhang X., "Electric Field and Laser Assisted Manufacturing of Advanced Materials for Extreme Environments", Ph.D. Dissertation, University of Nebraska - Lincoln (2022).
Zhou K., Li Y., Ha Y., Zhang M., Dachraoui W., Liu H., Zhang C., Liu X., Liu F., Battaglia C., Yang W., Liu J., Yang Y., "A Nearly Zero-Strain Li-Rich Rock-Salt Oxide with Multielectron Redox Reactions as a Cathode for Li-Ion Batteries", Chemistry of Materials, 34, 9711-9721 (2022).
Zhu N., Avery D.Z., Chen Y., An K., Jordon J.B., Allison P.G., Brewer L.N., "Residual Stress Distributions in AA6061 Material Produced by Additive Friction Stir Deposition", Journal of Materials Engineering and Performance, 32, 5535-5544 (2022).
2021 38 Publications
Chae H., "Effects of heat treatment on microstructre, plastic anisotropy, and phase transformation behavior in additively manufactured 15-5PH martensitic stainless steel", Ph.D. Dissertation, Chungnam National University (2021).
Chae H., Huang E., Woo W.C., Kang S.H., Jain J., An K., Lee S.Y., "Unravelling thermal history during additive manufacturing of martensitic stainless steel", Journal of Alloys and Compounds, 857, 157555 (2021).
Drozdenko D., Farkas G., Simko P., Fekete K., Capek J., Garces G., Ma D., An K., Mathis K., "Influence of Volume Fraction of Long-Period Stacking Ordered Structure Phase on the Deformation Processes during Cyclic Deformation of Mg-Y-Zn Alloys", Crystals, 11, 11 (2021).
Feng R., Feng B., Gao M.C., Zhang C., Neuefeind J., Poplawsky J., Ren Y., An K., Widom M., Liaw P.K., "Superior High-Temperature Strength in a Supersaturated Refractory High-Entropy Alloy", Advanced Materials, 33, 2102401 (2021).
Feng R., Rao Y., Liu C., Xie X., Yu D., Chen Y., Ghazisaeidi M., Ungar T., Wang H., An K., Liaw P.K., "Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy", Nature Communications, 12, 3588 (2021).
Feng R., Zhang C., Gao M.C., Pei Z., Zhang F., Chen Y., Ma D., An K., Poplawsky J., Ouyang L., Ren Y., Hawk J.A., Widom M., Liaw P.K., "High-throughput design of high-performance lightweight high-entropy alloys", Nature Communications, 12, 4329 (2021).
Frank M., "Alloy Design, Processing and Deformation Behavior of Metastable High Entropy Alloys", Ph.D. Dissertation, University of North Texas (2021).
Frank M., Nene S.S., Chen Y., Thapliyal S., Shukla S., Liu K., Sinha S., Wang T., Frost M., An K., Mishra R.S., "Direct evidence of the stacking fault-mediated strain hardening phenomenon", Applied Physics Letters, 119, 081906 (2021).
Fu S., Yu D., Chen Y., Zou T., Gai Z., Chen X., An K., "Magnetic ordering suppressed phase transformation of a TRIP-HEA during thermal cycling", Applied Physics Letters, 119, 171906 (2021).
Halacoglu S., Chertmanova S., Chen Y., Li Y., Rajapakse M., Sumanasekera G., Narayanan B., Wang H., "Visualization of Solid-State Synthesis for Chalcogenide Na Superionic Conductors by in situ Neutron Diffraction", ChemSusChem, 14, 5161-5166 (2021).
He H., Wang B., Ma D., Stoica A.D., Wu Z., Lan S., Naeem M., Wang X.L., "In situ neutron diffraction study of fatigue behavior of CrFeCoNiMo0.2 high entropy alloy", Intermetallics, 139, 107371 (2021).
Heisinger B., "Non-Destructive Characterization of Zircaloy-4 Nuclear Fuel cladding Using Neutron Scattering Techniques", Ph.D. Dissertation, University of Tennessee (2021).
Hou P., Li Y., Chae D., Ren Y., An K., Choo H., "Lean duplex TRIP steel: role of ferrite in the texture development, plastic anisotropy, martensitic transformation kinetics, and stress partitioning", Materialia, 15, 100952 (2021).
Kim G., "Data-Driven First-Principles Study of Ordering Phenomena in Complex Alloys", Ph.D. Dissertation, Illinois Institute of Technology, Chicago (2021).
Kumar S., "Transients in plastic instabilities during Thermo-mechanical reversals in an Additively Manufactured Ti6Al4V", Ph.D. Dissertation, University of Tennessee (2021).
Kumar S., Vijayan S.R., Nandwana P., Poplawsky J., Chen Y., Babu S.S., "Role of thermo-mechanical gyrations on the α\/β interface stability in a Ti6Al4V AM alloy", Scripta Materialia, 204, 114134 (2021).
Lee C., Maresca F., Feng R., Ungar T., Widom M., An K., Poplawsky J., Chou Y., Chou Y., Liaw P.K., Curtin W.A., "Strength can be controlled by edge dislocations in refractory high-entropy alloys", Nature Communications, 12, 5474 (2021).
Lee H., Chae H., Kim Y.S., Song M.J., Lim S., Prasad K., Krishnaswamy H., Jain J., An K., Lee S.Y., "Viscoplastic lattice strain during repeated relaxation of age-hardened Al alloy", Mechanics of Materials, 158, 103899 (2021).
Magagnosc D.J., Field D.M., Meredith C.S., Walter T.R., Limmer K.R., Lloyd J.T., "Superior strength and ductility in a low density duplex steel studied by in situ neutron diffraction", Materials Science & Engineering Technology, 799, 140252 (2021).
Milligan B., "Identification of Deformation Mechanisms in Thermally Stable Cast Al-Cu Alloys via Neutron Diffraction", Ph.D. Dissertation, Colorado School of Mines (2021).
Milligan B., Ma D., Allard L.F., Clarke A., Shyam A., "Crystallographic orientation-dependent strain hardening in a precipitation-strengthened Al-Cu alloy", Acta Materialia, 205, 116577 (2021).
Minneci R.P., "Microstructural Characterization and Analysis of Laser-Powder Bed Fusion GRCop-84 by Metallurgical and Neutron Scattering Methods", Ph.D. Dissertation, University of Tennessee (2021).
Nicholson D.E., Padula S.A., Benafan O., Bunn J.R., Payzant E.A., An K., Penumadu D., Vaidyanathan R., "Mapping of Texture and Phase Fractions in Heterogeneous Stress States during Multiaxial Loading of Biomedical Superelastic NiTi", Advanced Materials, 33, 5, 2005092 (2021).
Pan Q., Zhang L., Feng R., Lu Q., An K., Chuang A.C., Poplawsky J., Liaw P.K., Lu L., "Gradient-cell-structured high-entropy alloy with exceptional strength and ductility", Science, 374, 984-989 (2021).
Preimesberger J.I., Kang S., Chen Y., An K., Arnold C.B., "Investigating Mechano-Electrochemical Coupling Phenomenon in Lithium-Ion Pouch Cells Using In-situ Neutron Diffraction", ECS Transactions, 104, 75-85 (2021).
Tremsin A.S., Gao Y., Makinde A., Bilheux H.Z., Bilheux J., An K., Shinohara T., Oikawa K., "Monitoring residual strain relaxation and preferred grain orientation of additively manufactured Inconel 625 by in-situ neutron imaging", Additive Manufacturing, 46, 102130 (2021).
Xiao Z., Zuo W., Liu X., Xie J., He H., Xiang Y., Liu H., Yang Y., "Insights of the Electrochemical Reversibility of P2-Type Sodium Manganese Oxide Cathodes via Modulation of Transition Metal Vacancies", ACS Applied Materials & Interfaces, 13, 38305-38314 (2021).
Xie D., "In situ diffraction experiments and multiscale mechanics modeling of fatigue behavior in Mg alloys", Ph.D. Dissertation, University of Tennessee (2021).
Xie D., Lyu Z., Fan M., Chew H.B., Liaw P.K., Bei H., Zhang Z.W., Gao Y.F., "Micromechanical origin of the enhanced ductility in twinless duplex Mg-Li alloy", Materials Science and Engineering A, 815, (2021).
Xie D., Lyu Z., Li Y., Liaw P.K., Chew H.B., Ren Y., Chen Y., An K., Gao Y.F., "In situ monitoring of dislocation, twinning, and detwinning modes in an extruded magnesium alloy under cyclic loading conditions", Materials Science and Engineering A, 806, 140860 (2021).
Xin F., Zhou H., Zong Y., Zuba M.J., Chen Y., Chernova N.A., Bai J., Pei B., Goel A., Rana J., Wang F., An K., Piper L.F., Zhou G., Whittingham M.S., "What is the Role of Nb in Nickel-Rich Layered Oxide Cathodes for Lithium-Ion Batteries?", ACS Energy Letters, 6, 1377–1382 (2021).
Xu P., Yang Z., Yu X., Holoubek J., Gao H., Li M., Cai G., Bloom I., Liu H., Chen Y., An K., Pupek K.Z., Liu P., Chen Z., "Design and Optimization of the Direct Recycling of Spent Li-Ion Battery Cathode Materials", ACS Sustainable Chemistry & Engineering, 9, 12, 4543–4553 (2021).
Yang Y., Chen T., Tan L., Poplawsky J., An K., Wang Y., Samolyuk G.D., Littrell K.C., Lupini A.R., Borisevich A.Y., George E.P., "Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy", Nature, 595, 245–249 (2021).
Yu C., Lin K., Jiang S.H., Cao Y., Li W., Wang Y., Chen Y., An K., You L., Kato K., Li Q., Chen J., Deng J., Xing X., "Plastic and low-cost axial zero thermal expansion alloy by a natural dual-phase composite", Nature Communications, 12, 4701 (2021).
Zhang Q., Arnold W., Hood Z.D., Li Y., DeWees R., Chi M., Chen Z., Chen Y., Wang H., "Li0.625Al0.125H0.25Cl0.75O0.25 Superionic Conductor with Disordered Rock-Salt Structure", ACS Applied Energy Materials, 4, 7674-7680 (2021).
Zhang X., Wang F., Wu Z., Lu Y., Yan X., Nastasi M., Chen Y., Hao Y., Hong X., Cui B., "Direct Selective Laser Sintering of Hexagonal Barium Titanate Ceramics", Journal of the American Ceramic Society, 104, 3, 1271-1280 (2021).
Zhao Y., Schoell R., Zheng C., Cinbiz M.N., Frost M., An K., Kaoumi D., "Creep properties of advanced austenitic steel 709 determined through short experiments under in-situ neutron diffraction followed by TEM characterization", Materials Characterization, 182, 111519 (2021).
Zhong W., Lin J.l., Chen Y., Li Z., An K., Sutton B., Heuser B.J., "Microstructure, Hardness, and Residual Stress of the Dissimilar Metal Weldments of SA508-309L\/308L-304L", Metallurgical and Materials Transactions A, 52, 1927-1938 (2021).
2020 34 Publications
An K., Fu S., "High Entropy Alloys: Advanced Synchrotron X-Ray and Neutron Scattering Studies", Reference Module in Materials Science and Materials Engineering, 40, 339-357 (2020).
Bedekar V., Voothaluru R., Yu D., Wong A., Galindo-Nava E., Gorti S.B., An K., Hyde R.S., "Effect of nickel on the kinematic stability of retained austenite in carburized bearing steels - In-situ neutron diffraction and crystal plasticity modeling of uniaxial tension tests in AISI 8620, 4320 and 3310 steels", International Journal of Plasticity, 131, 102748 (2020).
Cakmak E., Gussev M.N., Sridharan N., Seren M.H., An K., Wang H., Terrani K.A., "Micromechanical and microstructure analysis of strain-induced phenomena in ultrasonic additively-manufactured Al-6061 alloy", Materials Science and Engineering A, 770, 138533 (2020).
Carmichael J., Polsky Y., An K., Anovitz L.M., Bingham P., Dessieux L., Ekici K., Frost M., Pemberton S., "A high-pressure flow through test vessel for neutron imaging and neutron diffraction-based strain measurement of geological materials", Review of Scientific Instruments, 91, 084502 (2020).
Chen Y., An K., Stoica A.D., "Determination Of Stress-Free Lattice Spacing (D0) For Residual Stress Relaxation Measurement In Ni-Based Superalloys By Neutron Diffraction", Oak Ridge National Laboratory TM-2019/1454 (2020).
Frank M., Chen Y., Nene S.S., Sinha S., Liu K., An K., Mishra R.S., "Investigating the deformation mechanisms of a highly metastable high entropy alloy using in-situ neutron diffraction", Materials Today Communications, 23, 100858 (2020).
Frank M., Nene S.S., Chen Y., Gwalani B., Kautz E.J., Devaraj A., An K., Mishra R.S., "Correlating work hardening with co-activation of stacking fault strengthening and transformation in a high entropy alloy using in-situ neutron diffraction", Scientific Reports, 10, 22263 (2020).
Fu S., "A meso-scale mechanics based study of material size effect and phase transformation-deformation coupling", Ph.D. Dissertation, Tianjin University (2020).
Gao H., Yan Q., Xu P., Liu H., Li M., Liu P., Luo J., Chen Z., "Efficient Direct Recycling of Degraded LiMn2O4 Cathodes by One-Step Hydrothermal Relithiation", ACS Applied Materials & Interfaces, 12, 51546–51554 (2020).
Ikeda T., Hirose S., Uozumi H., An K., Chen Y., Seid A., Okayama T., Katsurai T., "Residual stress analysis for additive manufactured large automobile parts by using neutron and simulation", WCX SAE World Congress Experience, 2020-01-1071, SAE International (2020).
Kim Y., Choi W., Choo H., An K., Choi H.S., Lee S.Y., "In Situ Neutron Diffraction Study of Phase Transformation of High Mn Steel with Different Carbon Content", Crystals, 10, 2, 101 (2020).
Kumar S., Kamath R., Nandwana P., Chen Y., Babu S.S., "Dynamic Phase Transformations in Additively Manufactured Ti-6Al-4V during Thermo-Mechanical Gyrations", Materialia, 14, 100883 (2020).
Lam T., Wu S., Chae H., Chen S.W., Jain J., Lee S.Y., An K., Vogel S.C., Chiu S., Yu D., Huang E., "Phase Stress Partition in Gray Cast Iron Using In Situ Neutron Diffraction Measurements", Metallurgical and Materials Transactions A, 51A, 5029-5035 (2020).
Lee C., Kim G., Chou Y., Musico B.L., Gao M.C., An K., Song G., Chou Y., Keppens V., Chen W., Liaw P.K., "Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy", Science Advances, 6, eaaz4748 (2020).
Lee C., Kim G., Gao M.C., An K., Brechtl J., Zhang C., Chen W., Poplawsky J., Song G., Ren Y., Chou Y., Chou Y., Liaw P.K., "Lattice-Distortion-Enhanced Yield Strength in a Refractory High-Entropy Alloy", Advanced Materials, 32, 49, 2004029 (2020).
Li Q., "Tuning the activity and reversibility of anion redox chemistry for the layered Li-rich Mn based cathode materials", Ph.D. Dissertation, University of Chinese Academy of Science (2020).
Li Q., Ning D., Zhou D., An K., Schuck G., Wong D., Kong W., Schulz C., Schumacher G., Liu X., "Tuning Both Anionic and Cationic Redox Chemistry of Li-Rich Li1.2Mn0.6Ni0.2O2 via a "Three-in-One" Strategy", Chemistry of Materials, 32, 21, 9404–9414 (2020).
Li Q., Ning D., Zhou D., An K., Wong D., Zhang L., Chen Z., Schuck G., Schulz C., Xu Z., Schumacher G., Liu X., "The effect of oxygen vacancy and spinel phase integration on both anionic and cationic redox in Li-rich cathode materials", Journal of Materials Chemistry A, 8, 16, 7733-7745 (2020).
Lin K., Li W., Yu C., Jiang S.H., Cao Y., Li Q., Chen J., Zhang M., Xia M., Chen Y., An K., Li X., Zhang Q., Gu L., Xing X., "High performance and low thermal expansion in Er-Fe-V-Mo dual-phase alloys", Acta Materialia, 198, 271-280 (2020).
Liu H., Zhu Z., Yan Q., Yu S., He X., Zhang R., Ma L., Liu T., Li M., Lin R., Chen Y., Chen Y., Li Y., Xing X., Choi Y., Gao L., Cho H.S., An K., Feng J., Kostecki R., Amine K., Wu T., Lu J., Xin H., Ong S.P., Liu P., "A disordered rock salt anode for fast-charging lithium-ion batteries", Nature, 585, 63-67 (2020).
Liu R., Liang Z., Xiang Y., Zhao W., Liu H., Chen Y., An K., Yang Y., "Recognition of V3+\/V4+\/V5+ Multielectron Reactions in Na3V(PO4)2: A Potential High Energy Density Cathode for Sodium-Ion Batteries", Molecules, 25, 1000 (2020).
Liu X., Zhong G., Xiao Z., Zheng B., Zuo W., Zhou K., Liu H., Liang Z., Xiang Y., Chen Z., Ortiz G.F., Fu R., Yang Y., "Al and Fe-containing Mn-based layered cathode with controlled vacancies for highrate sodium ion batteries", Nano Energy, 76, 104997 (2020).
Parete-Koon S., Peterson P.F., Granroth G.E., Zhou W., Devineni P., Laanait N., "An Open Call to Solve Data Problems in the Areas of Neutron Science, Material Science, Urban Modeling and Dynamics, Geophysics, and Biomedical Informatics", 17th Smoky Mountains Computational Sciences and Engineering Conference, SMC 2020 , pp 425–442, (2020).
Petz D., Muhlbauer M.J., Baran V., Frost M., Schokel A., Paulmann C., Chen Y., Garces D., Senyshyn A., "Lithium heterogeneities in cylinder-type Li-ion batteries - fatigue induced by cycling", Journal of Power Sources, 448, 227466 (2020).
Qiu B., Zhang M., Lee S., Liu H., Wynn T., Wu L., Zhu Y., Wen W., Brown C.M., Zhou D., Liu Z., Meng Y.S., "Metastability and Reversibility of Anionic Redox-Based Cathode for High-Energy Rechargeable Batteries", Cell Reports Physical Science, 1, 3, 100028 (2020).
Sarkar S., Gao Y., Huang S., Bhattacharya S., Patil S., Oruganti R., "Back-Stress and Its Evolution during Primary Creep in Particle Strengthened Nickel Superalloys", Crystals, 10, 4, 306 (2020).
Smith T.M., Carter R.W., An K., Chen Y., Locci I.E., Pawlik R.J., Gabb T.P., Telesman I., Evans L.J., "Residual Stress Measurements of Ni-base Superalloys through Neutron Diffraction", NASA Glenn Research Center NASA/TM-20205008113 (2020).
Wang F., Zhang X., Yan X., Lu Y., Nastasi M., Chen Y., Cui B., "The Effect of Submicron Grain Size on Thermal Stability and Mechanical Properties of High‐Entropy Carbide Ceramics", Journal of the American Ceramic Society, 103, 4463-4472 (2020).
Wang H., Lee S.Y., Wang H., Woo W.C., Huang E., Jain J., An K., "On plastic anisotropy and deformation history-driven anelasticity of an extruded magnesium alloy", Scripta Materialia, 176, 36-41 (2020).
Wissink M., Chen Y., Frost M., Curran S.J., Rios O., Sims Z.C., Weiss D.T., Stromme E.T., An K., "Operando measurement of lattice strain in internal combustion engine components by neutron diffraction", Proceedings of the National Academy of Sciences of the United States of America, 117, 52, 33061-33071 (2020).
Wu J., Wu J., "Study of Lattice Oxygen Reaction and Modification Mechanism in Lithium- and Manganese-Rich Cathode Material for Lithium Ion Battery", Ph.D. Dissertation, Xiamen University (2020).
Wu J., Zhang X., Zheng S., Liu H., Fu R., Wu J., Li Y., Xiang Y., Liu R., Zuo W., Cui Z., Wu Q., Wu S., Chen Z., Liu P., Yang W., Yang Y., "Tuning Oxygen Redox Reaction through the Inductive Effect with Proton Insertion in Li-Rich Oxides", ACS Applied Materials & Interfaces, 12, 7277-7284 (2020).
Xie Q., Lian J., Sidor J.J., Sun F., Yan X., Chen C., Liu T.K., Chen W., Yang P., An K., Wang Y.D., "Crystallographic orientation and spatially resolved damage in a dispersion-hardened Al alloy", Acta Materialia, 193, 138-150 (2020).
Xu P., Dai Q., Gao H., Liu H., Zhang M., Li M., Chen Y., An K., Meng Y.S., Liu P., Li Y., Spangenberger J.S., Gaines L., Lu J., Chen Z., "Efficient Direct Recycling of Lithium-Ion Battery Cathodes by Targeted Healing", Joule, 4, 12, 2609-2626 (2020).
2019 37 Publications
Aba-Perea P.E., Withers P.J., Pirling T., Paradowska A., Ma D., Preuss M., "In Situ Study of the Stress Relaxation During Aging of Nickel-Base Superalloy Forgings", Metallurgical and Materials Transactions A, 50, 8, 3555–3565 (2019).
An K., Chen Y., Stoica A.D., "VULCAN: A "hammer" for high-temperature materials research", MRS Bulletin, 44, 878-885 (2019).
Chen B., "Element Effect of Mn and Ge on Mechanical Properties of High-Entropy Alloys via In-situ Neutron Diffraction", Master's Thesis, National Yang Ming Chiao Tung University (2019).
Cochrane C., Daymond M.R., "Effect of Temperature and Loading Sense On Deformation-Induced Phase Transformation in a High Sn Content Zirconium Alloy", Materials Science and Engineering A, 748, 313-326 (2019).
Dessieux L., "Single crystal to Polycrystal Neutron Transmission Simulation", Ph.D. Dissertation, University of Tennessee (2019).
Dessieux L., Stoica A.D., Bingham P., An K., Frost M., Bilheux H.Z., "Neutron transmission simulation of texture in polycrystalline materials", Nuclear Instruments and Methods in Physics Research Section B, 459, 166-178 (2019).
Diao H., Ma D., Feng R., Liu T.K., Pu C., Zhang C., Guo W.T., Poplawsky J., Gao Y.F., Liaw P.K., "Novel NiAl-strengthened high entropy alloys with balanced tensile strength and ductility", Materials Science and Engineering A, 742, 636-647 (2019).
Fan Q., Yang S., Liu J., Liu H., Lin K., Liu R., Hong C., Liu L., Chen Y., An K., Liu P., Shi Z., Yang Y., "Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries", Journal of Power Sources, 421, 91-99 (2019).
Feng R., "Experimental and Theoretical Design and Study of Advanced Precipitation-Strengthened High-Entropy Alloys", Ph.D. Dissertation, University of Tennessee (2019).
Huang E., Chou H.S., Tu K.N., Hung W., Lam T.N., Tsai C., Chiang C., Lin B., Yeh A., Chang S., Yang J., Li X., Ku C., An K., Chang Y., Chang Y., Jao Y.L., "Element Efects on High-Entropy Alloy Vacancy and Heterogeneous Lattice Distortion Subjected to Quasi-equilibrium Heating", Scientific Reports, 9, 14788 (2019).
Huang E., Lee S.Y., Jain J., Tong Y., An K., Tsou N.T., Lam T.N., Yu D., Chae H., Chen S.M., Chen S.W., Chou H.S., "Hardening steels by the generation of transient phase using additive manufacturing", Intermetallics, 109, 60-67 (2019).
Kim G., Diao H., Lee C., Samaei A.T., Phan T., de Jong M., An K., Ma D., Liaw P.K., Chen W., "First-principles and machine learning predictions of elasticity in severely lattice-distorted high-entropy alloys with experimental validation", Acta Materialia, 181, 124-138 (2019).
Kim Y., "TRIP\/TWIP characteristics of high-Mn steel containing different carbon contents using in-situ neutron diffraciton analysis", Master's Thesis, Chungnam National University (2019).
Lee C., "Design and Development of Strong and Ductile Single BCC Refractory High-entropy Alloys for High-temperature Applications", Ph.D. Dissertation, University of Tennessee (2019).
Li R., Wang Y.D., Liu W., Geng C., Xie Q., Brown D.E., An K., "Multiscale mechanical fatigue damage of stainless steel investigated by neutron diffraction and X-ray microdiffraction", Acta Materialia, 165, 336-345 (2019).
Li Y., "Dynamic recrystallization of a Mg alloy during friction stir processing: grain size refinement and texture evolution", Ph.D. Dissertation, University of Tennessee (2019).
Liu H., Zhu Z., Huang J., He X., Chen Y., Zhang R., Lin R., Li Y., Yu S., Xing X., Yan Q., Li X., Frost M., An K., Feng J., Kostecki R., Xin H., Ong S.P., Liu P., "Elucidating the Limit of Li Insertion into the Spinel Li4Ti5O12", ACS Materials Letters, 1, 96-102 (2019).
Liu S.F., Wu Y., Lin W.T., Shang Y.Y., Liu J.B., An K., Liu X.J., Wang H., Wang H.T., Lu Z.P., "Transformation-reinforced high-entropy alloys with superior mechanical properties via tailoring stacking fault energy", Journal of Alloys and Compounds, 792, 444-455 (2019).
Liu T.K., "Structural and Deformation Heterogeneities in Chemically Complex Multicomponent Alloys", Ph.D. Dissertation, University of Tennessee (2019).
Liu X., Chen Y., Hood Z.D., Ma C., Yu S., Sharafi A., Wang H., An K., Sakamoto J., Siegel D.J., Cheng Y.Q., Jalarvo N., Chi M., "Elucidating the mobility of H+ and Li+ ions in (Li6.25xHxAl0.25)La3Zr2O12 via correlative neutron and electron spectroscopy", Energy & Environmental Science, 12, 3, 945-951 (2019).
Nagler S.E., Stoica A.D., Stoica G.M., An K., Skorpenske H.D., Rios O., Hendin D.B., Bower N.W., "Time-of-Flight Neutron Diffraction (TOF-ND) Analyses of the Composition and Minting of Ancient Judaean "Biblical" Coins", Journal of Analytical Methods in Chemistry, 2019, 6164058 (2019).
Peterson I.M., Shi Y., Ma D., Rygel J.L., Wheaton B., Whitfield P., Wright J., Carlineo M., "In-situ Measurements of Reactions in a Glass Forming Batch by X-ray and Neutron Diffraction", Journal of the American Ceramic Society, 102, 3, 1495-1506 (2019).
Puplampu S.B., "Thermo-Mechanical Loading and Multi-Axial Response of Aluminum and Titanium Structural Alloys Using Neutrons and X-Rays", Ph.D. Dissertation, University of Tennessee (2019).
Rauch H.A., Chen Y., An K., Yu H.Z., "In Situ Investigation of Stress-Induced Martensitic Transformation in Granular Shape Memory Ceramic Packings", Acta Materialia, 168, 362-375 (2019).
Shang Y.Y., Wu Y., He J.Y., Zhu X.Y., Liu S.F., Huang H.L., An K., Chen Y., Jiang S.H., Wang H., Liu X.J., Lu Z.P., "Solving the strength-ductility tradeoff in the medium-entropy NiCoCr alloy via interstitial strengthening of carbon", Intermetallics, 106, 77-87 (2019).
Voothaluru R., Bedekar V., Yu D., Xie Q., An K., Pauskar P., Hyde R.S., "Investigating the Difference in Mechanical Stability of Retained Austenite in Bainitic and Martensitic High-Carbon Bearing Steels using in situ Neutron Diffraction and Crystal Plasticity Modeling", Metals, 9, 5, 482 (2019).
Wang S.Y., "Novel Creep-Resistant Ferritic Alloy Designed by the Concept of Precipitation Hardening with Two Types of Precipitates", Ph.D. Dissertation, University of Tennessee (2019).
Wang Z., Beese A.M., "Stress state-dependent mechanics of additively manufactured 304L stainless steel: Part 2 - Characterization and modeling of macroscopic plasticity behavior", Materials Science and Engineering A, 743, 824-831 (2019).
Wang Z., Beese A.M., "Stress state-dependent mechanics of additively manufactured 304L stainless steel: Part 1 - characterization and modeling of the effect of stress state and texture on microstructural evolution", Materials Science and Engineering A, 743, 811-823 (2019).
Wei Z., "Effects of composition and morphology on osseointegration of laminated titanium, aluminum, tetravanadium implants", Master's Thesis, National Chiao Tung University (2019).
Weiss D.T., "Composites and Alloys Based on the Al-Ce System", Aluminium Alloys and Composites IntechOpen (2019).
Weiss D.T., "Improved High-Temperature Aluminum Alloys Containing Cerium", Journal of Materials Engineering and Performance, 28, 1903–1908 (2019).
Yang S., Fan Q., Shi Z., Liu L., Ke X., Liu J., Liu J., Hong C., Yang Y., Guo Z., "Superior stability secured by a four-phase cathode electrolyte interface on Ni-rich cathode for lithium ion batteries", ACS Applied Materials & Interfaces, 11, 36742-36750 (2019).
Yuan Y., Wu Y., Yang Z., Liang X., Lei Z., Huang H.L., Wang H., Liu X.J., An K., Wu W., Lu Z.P., "Formation, structure and properties of biocompatible TiZrHfNbTa high-entropy alloys", Materials Research Letters, 7, 6, 225-231 (2019).
Zheng S., "Studies on Oxide Cathode Materials for Li-\/Na-ion Batteries with High Energy Density", Ph.D. Dissertation, Xiamen University (2019).
Zheng S., Zheng F., Liu H., Zhong G., Wu J., Feng M., Wu Q., Zuo W., Hong C., Chen Y., An K., Liu P., Wu S., Yang Y., "A novel ordered rocksalt type Li-rich Li2Ru1-xNixO3-δ (0.3 ≤ x ≤ 0.5) cathode material with tunable anionic redox potential", ACS Applied Energy Materials, 2, 5933-5944 (2019).
2018 51 Publications
An K., Armitage D., Yu Z.Z., Dickson R., Mills R.A., Feng Z., Skorpenske H.D., "RHEGAL: Resistive heating gas enclosure loadframe for in situ neutron scattering", Review of Scientific Instruments, 89, 9, 092901 (2018).
An K., McClintock D.A., Frost M., "Residual Stress Measurements of Front Window Welds in a Prototypical Spallation Neutron Source Target Module", Oak Ridge National Laboratory ORNL/TM-2018/837 (2018).
Beese A.M., Wang Z., Stoica A.D., Ma D., "Absence of dynamic strain aging in an additively manufactured nickel-base superalloy", Nature Communications, 9, 2083 (2018).
Calder S., An K., Boehler R., dela Cruz C., Frontzek M., Guthrie M., Haberl B., Huq A., Kimber S.A., Liu J., Molaison J.J., Neuefeind J., Page K., Dos Santos A.M., Taddei K.M., Tulk C.A., Tucker M.G., "A suite-level review of the neutron powder diffraction instruments at Oak Ridge National Laboratory", Review of Scientific Instruments, 89, 9, 092701 (2018).
Chandran R.K., "Final Technical Report: Application of in situ Neutron Diffraction to Understand the Mechanism of Phase Transitions", US Department of Energy DE-Utah-SC0008681 (2018).
Chi M., Liu X., Hachtel J., Jalarvo N., Cheng Y.Q., Sakamoto J., "Elucidating Ion Transport in Lithium-Ion Conductors by Combining Vibrational Spectroscopy in STEM and Neutron Scattering", Proceedings of Microscopy & Microanalysis 2018, 1496, (2018).
Cochrane C., "Deformation-Induced Phase Transformation in a Quaternary Zirconium Alloy", Ph.D. Dissertation, Queen's University (2018).
Cole D.P., Henry T.C., An K., Chen Y., Haynes R.A., "Damage Precursor Assessment in Aerospace Structural Materials", ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), SMASIS2018-7908, (2018).
Du Z., Zhao H., Li S., Zhang Y., Chang X., Xia Q., Chen N., Gu L., Swierczek K., Li Y., Yang T., An K., "Exceptionally High Performance Anode Material Based on Lattice Structure Decorated Double Perovskite Sr2FeMo2\/3Mg1\/3O6-δ for Solid Oxide Fuel Cells", Advanced Energy Materials, 8, 18, 1800062 (2018).
Fu S., Bei H., Chen Y., Liu T.K., Yu D., An K., "Deformation mechanisms and work-hardening behavior of transformation-induced plasticity high entropy alloys by in-situ neutron diffraction", Materials Research Letters, 6, 11, 620-626 (2018).
Granroth G.E., An K., Smith H.L., Whitfield P., Neuefeind J., Lee J., Zhou W., Sedov V.N., Peterson P.F., Parizzi A., Skorpenske H.D., Hartman S.M., Huq A., Abernathy D.L., "Event-based processing of neutron scattering data at the Spallation Neutron Source", Journal of Applied Crystallography, 51, 1-14 (2018).
Herringer S., Ryzewskir K., Bilheux H.Z., Bilheux J., Sheldon B., "Evaluation of segregation in Roman sestertius coins", Journal of Materials Science, 53, 3, 2161-2170 (2018).
Huang L., Chen X., Yu D., Chen Y., An K., "Residual Stress Distribution in a Hydroformed Advanced High Strength Steel Component: Neutron Diffraction Measurements and Finite Element Simulations", WCX SAE World Congress Experience, 2018-01-0803, SAE Technical Paper (2018).
Huang S., An K., Gao Y., Suzuki A., "Determination of γ\/γ′ Lattice Misfit in Ni-Based Single-Crystal Superalloys at High Temperatures by Neutron Diffraction", Metallurgical and Materials Transactions A, 49, 3, 740–751 (2018).
Jao Y.L., "High Temperature Behaviors of High-Entropy Alloys: Estimation of Vacancy Concentration", Master's Thesis, National Chiao Tung University (2018).
Kaup K., Lalere F., Huq A., Shyamsunder A., Adermann T., Hartmann P., Nazar L.F., "Correlation of structure and fast ion conductivity in the solid solution series Li1+2xZn1-xPS4", Chemistry of Materials, 30, 3, 592-596 (2018).
Krywopusk N.M., "Characterization of Magnesium and Magnesium Alloys Processed by Equal Channel Angular Extrusion", Ph.D. Dissertation, Johns Hopkins University (2018).
Lee C., Song G., Gao M.C., Feng R., Chen P., Brechtl J., Chen Y., An K., Guo W.T., Poplawsky J., Li S., Samaei A.T., Chen W., Hu A., Choo H., Liaw P.K., "Lattice Distortion in a Strong and Ductile Refractory High-entropy Alloy", Acta Materialia, 160, 158-172 (2018).
Lei Z., Liu X.J., Jiang S.H., Wang S., Hui X., Wu Y., Wu Y., Gault B., Kontis P., Raabe D., Gu L., Zhang Q., Chen H., Wang H., Wang H.T., Liu J.B., An K., Zeng Q., Nieh T.G., Lu Z.P., "Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes", Nature, 563, 546–550 (2018).
Lin J.l., "Investigation Effect of External Stress on Hydrogen Solvus in a Zircaloy-4 Fuel Cladding Alloy: Application of In Situ Diffraction and Mesoscale Phase-Field Simulation", Ph.D. Dissertation, University of Illinois at Urbana-Champaign (2018).
Liu H., Liu H., Seymour I.D., Chernova N.A., Wiaderek K.M., Trease N.M., Hy S., Chen Y., An K., Zhang M., Borkiewicz O.J., Lapidus S., Qiu B., Xia Y., Liu Z., Chupas P.J., Chapman K.W., Whittingham M.S., Grey C.P., Meng Y.S., "Identifying the chemical and structural irreversibility in LiNi0.8Co0.15Al0.05O2 - a model compound for classical layered intercalation", Journal of Materials Chemistry A, 6, 9, 4189-4198 (2018).
Liu R., "Study of Vanadium-based Phosphates Cathode Materials for Sodium Ion batteries\", Ph.D. Dissertation, Xiamen University", Ph.D. Dissertation, Xiamen University (2018).
Liu T.K., Gao Y.F., Bei H., An K., "In situ neutron diffraction study on tensile deformation behavior of carbon-strengthened CoCrFeMnNi high-entropy alloys at room and elevated temperatures", Journal of Materials Research, 33, 19, 3192-3203 (2018).
Liu Y., Li C.W., Liu C., Chen Y., An K., Landskron K., "Probing the electrolyte infiltration behaviour of activated carbon supercapacitor electrodes by in situ neutron scattering using aqueous NaCl as electrolyte", Carbon, 136, 139-142 (2018).
Lugovy M., Aman A., Orlovskaya N., Slyunyayev V., Graule T., Kuebler J., Reece M.J., Chen Y., Ma D., An K., "Time and frequency dependent mechanical properties of LaCoO3-based perovskites: Neutron diffraction and domain mobility", Journal of Applied Physics, 124, 20, 205104 (2018).
Lugovy M., Orlovskaya N., Pathak S., Radovic M., Lara-Curzio E., Verbylo D., Kuebler J., Graule T., Reece M.J., "Time and frequency dependent mechanical properties of LaCoO3-based perovskites: Internal friction and negative creep", Journal of Applied Physics, 124, 20, 205103 (2018).
Meric de Bellefon G., "Influence of Deformation Twins on the Radiation Response of 316 Austenitic Stainless Steel", Ph.D. Dissertation, University of Wisconsin - Madison (2018).
Meric de Bellefon G., Gussev M.N., Stoica A.D., van Duysen J.C., Sridharan K., "Examining the influence of stacking fault width on deformation twinning in an austenitic stainless steel", Scripta Materialia, 157, 162-166 (2018).
Olson M.D., Spradlin T.J., DeWald A.T., Hill M.R., "Multi-Technique Residual Stress Measurements to Quantify Stress Relief of 7085-T7452 Aluminum Die Forgings", Materials Performance and Characterization, 7, 4, (2018).
Phillips F.R., "Effect of Phase Transformation on Stress Redistribution and Damage Evolution During Actuation Fatigue in Shape Memory Alloys", Ph.D. Dissertation, Texas A&M (2018).
Shang Y.Y., "Interstitial strengthening effect of carbon on NiCoCr medium-entropy alloys", Master's Thesis, University of Science and Technology Beijing (2018).
Song W.L., "Fabrication and mechanical properties of large-sized bulk metallic glass composites ductilized by transformation-induced-plasticity effect", Ph.D. Dissertation, University of Science and Technology Beijing (2018).
Stoica G.M., Dessieux L., Stoica A.D., Vogel S.C., Muralidharan G., Radhakrishnan B., Gorti S.B., An K., Ma D., Wang X.L., "Distinct Recrystallization Pathways in a Cold-Rolled Al-2%Mg Alloy Evidenced by In-Situ Neutron Diffraction", Quantum Beam Science, 2, 3, 17 (2018).
Voothaluru R., Bedekar V., Xie Q., Stoica A.D., Hyde R.S., An K., "In-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in bearing steels", Materials Science and Engineering A, 711, 579–587 (2018).
Wang D., "In-situ Neutron Diffraction Studies on Micro- mechanical Behaviors of CuZr-based Bulk Metallic Glass Composites with Deformation-induced Phase Transformation", Ph.D. Dissertation, Northeastern University China (2018).
Wang D., Chen Y., Mu J., Zhu Z.W., Zhang H., Wang Y.D., An K., "An in situ neutron diffraction study of plastic deformation in a Cu46.5Zr46.5Al7 bulk metallic glass composite", Scripta Materialia, 153, 118–121 (2018).
Wang H., Chen Y., Hood Z.D., Keum J.K., Pandian A.S., Chi M., An K., Liang C., Sunkara M.K., "Revealing the Structural Stability and Na-Ion Mobility of 3D Superionic Conductor Na3SbS4 at Extremely Low Temperatures", ACS Applied Energy Materials, 1, 12, 7028–7034 (2018).
Wang Z., "Experimental Characterization and Modeling of Multiaxial Plasticity Behavior of 304l Austenitic Stainless Steel 304l Produced by Additive Manufacturing", Ph.D. Dissertation, Pennsylvania State University (2018).
Wang Z., Stoica A.D., Ma D., Beese A.M., "Stress relaxation in a nickel-base superalloy at elevated temperatures with in situ neutron diffraction characterization: Application to additive manufacturing", Materials Science and Engineering A, 714, 75-83 (2018).
Wu W., Stoica A.D., Berry K.D., Frost M., Skorpenske H.D., An K., "PIND: High spatial resolution by pinhole neutron diffraction", Applied Physics Letters, 112, 25, 253501 (2018).
Wu W., Stoica A.D., Yu D., Frost M., Skorpenske H.D., An K., "Bending Behavior of a Wrought Magnesium Alloy Investigated by the In Situ Pinhole Neutron Diffraction Method", Crystals, 8, 9, 348 (2018).
Xie Q., Chen Y., Yang P., Zhao Z., Wang Y.D., An K., "In-situ neutron diffraction investigation on twinning\/detwinning activities during tension-compression load reversal in a twinning induced plasticity steel", Scripta Materialia, 150, 168-172 (2018).
Xie Q., Pei Z., Liang J., Yu D., Zhao Z., Yang P., Li R., Eisenbach M., An K., "Transition from the twinning induced plasticity to the γ-ε transformation induced plasticity in a high manganese steel", Acta Materialia, 161, 273-284 (2018).
Xie Q., Song G., Gorti S.B., Stoica A.D., Radhakrishnan B., Bilheux J., Kirka M.M., Dehoff R.R., Bilheux H.Z., An K., "Applying neutron transmission physics and 3D statistical full-field model to understand 2D Bragg-edge imaging", Journal of Applied Physics, 123, 7, 074901 (2018).
Xing R., Yu D., Xie G., Yang Z., Wang X., Chen X., "Effect of thermal aging on mechanical properties of a bainitic forging steel for reactor pressure vessel", Materials Science and Engineering A, 720, 169-175 (2018).
Yang T., "Fundamentals Of Srcoo3 Based Oxygen-Deficient Perovskites As Cathodes For Solid Oxide Fuel Cells", Ph.D. Dissertation, University of South Carolina (2018).
Yang T., Matthews A., Xu N., Chen Y., An K., Ma D., Huang K., "Understanding Structure-Activity Relationships in Sr1-xYxCoO3-δ through in-situ Neutron Diffraction and Electrochemical Measurements", ACS Applied Materials & Interfaces, 10, 42, 35984–35993 (2018).
Yang T., Mattick V., Chen Y., An K., Ma D., Huang K., "Crystal Structure and Transport Properties of Oxygen-Deficient Perovskite Sr0.9Y0.1CoO3-#", ACS Applied Energy Materials, 1, 2, 822–832 (2018).
Yang Y., "Phase transformation and performance regulation of TiNiCoHfCuZr high entropy alloys", Master's Thesis, University of Science and Technology Beijing (2018).
Yu D., Chen Y., Huang L., An K., "Tracing Phase Transformation and Lattice Evolution in a TRIP Sheet Steel under High-Temperature Annealing by Real-Time In Situ Neutron Diffraction", Crystals, 8, 9, 360 (2018).
Yu D., Huang L., Chen Y., Komolwit P., An K., "Real-Time In Situ Neutron Diffraction Investigation of Phase-Specific Load Sharing in a Cold-Rolled TRIP Sheet Steel", JOM, 70, 8, 1576–1586 (2018).
2017 45 Publications
Aba-Perea P.E., "In-situ stress relaxation studies in nickel-base superalloy forgings", Ph.D. Dissertation, University of Manchester (2017).
An K., Yuan L., Dial L., Spinelli I., Stoica A.D., Gao Y.F., "Neutron residual stress measurement and numerical modeling in a curved thin-walled structure by laser powder bed fusion additive manufacturing", Materials & Design, 135, 122-132 (2017).
Bedekar V., Voothaluru R., Xie Q., Stoica A.D., Hyde R.S., An K., "In-situ Neutron Diffraction Analysis of Crystal Plasticity of Retained Austenite in Bearing Steel", Proceedia Engineering, 207, 1958-1963 (2017).
Benafan O., Garg A., Noebe R.D., Skorpenske H.D., An K., Schell N., "Deformation characteristics of the intermetallic alloy 60NiTi", Intermetallics, 82, 40-52 (2017).
Brugger A., "On the Boundary Conditions and Internal Mechanics of Parallel Wire Strands", Ph.D. Dissertation, Columbia University (2017).
Brugger A., Lee S.Y., Mills J.A., Betti R., Noyan I.C., "Partitioning of Clamping Strains in a Nineteen Parallel Wire Strand", Experimental Mechanics, 57, 6, 921–937 (2017).
Brugger A., Lee S.Y., Noyan I.C., Betti R., "Designing and Validating Parallel Wire Suspension Bridge Wire Strands for Neutron Diffraction Stress Mapping ", Materials Science Forum, 905, 123-130 (2017).
Chen B., "Mechanical Behavior of Pipeline Steels and an Al0.1CoCrFeNi High-Entropy Alloy", Ph.D. Dissertation, University of Tennessee (2017).
Chen S.M., "In-situ Neutron Diffraction Measurements to Investigate the Additive-Direction-Dependent Deformation of Additive Manufactured (AM) Stainless Steel", Master's Thesis, National Chiao Tung University (2017).
Chen Y., Cheng Y.Q., Li J.C., Feygenson M., Heller W.T., Liang C., An K., "Lattice-Cell Orientation Disorder in Complex Spinel Oxides", Advanced Energy Materials, 7, 4, 1601950 (2017).
Chen Y., Yu D., An K., "Stress-induced charge-ordering process in LiMn2O4", Materials Research Letters, 5, 2, 89-94 (2017).
Coakley J., Lass E.A., Ma D., Frost M., Seidman D.N., Dunand D.C., Stone H.J., "Rafting and elastoplastic deformation of superalloys studied by neutron\u00a0diffraction", Scripta Materialia, 134, 110-114 (2017).
Coakley J., Lass E.A., Ma D., Frost M., Stone H.J., Seidman D.N., Dunand D.C., "Lattice parameter misfit evolution during creep of a cobalt-based superalloy single crystal with cuboidal and rafted gamma-prime microstructures", Acta Materialia, 136, 118-125 (2017).
Coakley J., Ma D., Frost M., Dye D., Seidman D.N., Dunand D.C., Stone H.J., "Lattice strain evolution and load partitioning during creep of a Ni-based superalloy single crystal with rafted γ′ microstructure", Acta Materialia, 135, 77-87 (2017).
Diao H., "Experimental and Computational Investigation of High-entropy Alloys for Elevated Temperature Applications", University of Tennessee (2017).
Huang H.L., Wu Y., He J.Y., Wang H., Liu X.J., An K., Wu W., Lu Z.P., "Phase-Transformation Ductilization of Brittle High-Entropy Alloys via Metastability Engineering", Advanced Materials, 29, 30, 1701678 (2017).
Huang J., Liu H., Zhou N., An K., Meng Y.S., Luo J., "Enhancing the Ion Transport in LiMn1.5Ni0.5O4 by Altering the Particle Wulff Shape via Anisotropic Surface Segregation", ACS Applied Materials & Interfaces, 9, 42, 36745–36754 (2017).
Jin K., Mu S., An K., Porter W.D., Samolyuk G.D., Stocks G.M., Bei H., "Thermophysical properties of Ni-containing single-phase concentrated solid solution alloys", Materials & Design, 117, 185-192 (2017).
Kim D.K., Hwang J.H., Kim E.Y., Heo Y.U., Woo W.C., Choi S.H., "Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM", Journal of Alloys and Compounds, 714, 687-697 (2017).
Lin J.l., An K., Stoica A.D., Heuser B.J., "Effect of external stress on deuteride (hydride) precipitation in Zircaloy-4 using in situ neutron diffraction", Journal of Nuclear Materials, 487, 396-405 (2017).
Liu H., Lapidus S., Meng Y., Chupas P.J., Chapman K.W., "Sensitivity and Limitations of Structures from X-ray and Neutron-Based Diffraction Analyses of Transition Metal Oxide Lithium-Battery Electrodes", Journal of the Electrochemical Society, 164, 9, A1802-A1811 (2017).
Liu T.K., Wu Z., Stoica A.D., Xie Q., Wu W., Gao Y.F., Bei H., An K., "Twinning-mediated work hardening and texture evolution in CrCoFeMnNi high entropy alloys at cryogenic temperature ", Materials & Design, 131, 419–427 (2017).
Ma D., Stoica A.D., Wang Z., Beese A.M., "Crystallographic texture in an additively manufactured nickel-base superalloy", Materials Science and Engineering A, 684, 47-53 (2017).
Ma X., An K., Bai J., Chen H., "NaAlTi3O8, A Novel Anode Material for Sodium Ion Battery", Scientific Reports, 7, 162 (2017).
Nicholson D.E., "Multi-axial Thermomechanical Characterization of Shape Memory Alloys for Improved Stability", Ph.D. Dissertation, University of Central Florida (2017).
Nicholson D.E., Padula S.A., Benafan O., Vaidyanathan R., "Texture evolution during isothermal, isostrain, and isobaric loading of polycrystalline shape memory NiTi", Applied Physics Letters, 110, 25, 251903 (2017).
Polsky Y., An K., Dessieux L., "Neutron Diffraction Measurement of Pore Pressure Influence on Lattice Strains in Geological Materials", 51st US Rock Mechanics / Geomechanics Symposium, ARMA 17-991, (2017).
Qiu B., Zhang M., Xia Y., Liu Z., Meng Y.S., "Understanding and Controlling Anionic Electrochemical Activity in High-Capacity Oxides for Next Generation Li-Ion Batteries", Chemistry of Materials, 29, 3, 908-915 (2017).
Ren F., Schmidt R., Case E.D., An K., "In Situ Neutron Scattering Study of Nanostructured PbTe-PbS Bulk Thermoelectric Material", Journal of Electronic Materials, 46, 5, 2604–2610 (2017).
Sims Z.C., Rios O., Weiss D.T., Turchi P.E., Perron A., Lee J.R., Li T.T., Hammons J.A., Bagge-Hansen M., Willey T.M., An K., Chen Y., King A.H., McCall S.K., "High performance aluminum-cerium alloys for high-temperature applications", Materials Horizons, 4, 6, 1070-1078 (2017).
Song G., Lee C., Hong S., Kim K.B., Chen S., Ma D., An K., Liaw P.K., "Martensitic transformation in a B2-containing CuZr-based BMG composite revealed by in situ neutron diffraction", Journal of Alloys and Compounds, 723, 714–721 (2017).
Song G., Lin J.Y., Bilheux J., Xie Q., Santodonato L., Molaison J.J., Skorpenske H.D., Dos Santos A.M., Tulk C.A., An K., Stoica A.D., Kirka M.M., Dehoff R.R., Tremsin A.S., Bunn J.R., Sochalski-Kolbus L.M., Bilheux H.Z., "Characterization of Crystallographic Structures Using Bragg-Edge Neutron Imaging at the Spallation Neutron Source", Journal of Imaging, 3, 4, 65 (2017).
Sui T., "Study on the Fatigue Behavior of equiatomic CoCrFeMnNi High Entropy Alloy by in-situ Neutron Diffraction Investigation", Master's Thesis, National Yang Ming Chiao Tung University (2017).
Vadlamani B.S., "Neutron Diffraction Study of Performance of Microcolumnar Si Electrodes For Li-ion Batteries Using In-situ Electrochemical Cell", Ph.D. Dissertation, University of Utah (2017).
Wang D., Mu J., Chen Y., Qi Y., Wu W., Wang Y.D., Xu H., Zhang H., An K., "A study of stress-induced phase transformation and micromechanical behavior of CuZr-based alloy by in-situ neutron diffraction", Journal of Alloys and Compounds, 696, 1096–1104 (2017).
Wang H., Capolungo L., Clausen B., Tome C.N., "A crystal plasticity model based on transition state theory", International Journal of Plasticity, 93, 251–268 (2017).
Wang Z., Beese A.M., "Effect of chemistry on martensitic phase transformation kinetics and resulting properties of additively manufactured stainless steel", Acta Materialia, 131, 410-422 (2017).
Wang Z., Denlinger E., Michaleris P., Stoica A.D., Ma D., Beese A.M., "Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions", Materials & Design, 113, 169–177 (2017).
Wang Z., Stoica A.D., Ma D., Beese A.M., "Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing", Materials Science and Engineering A, 707, 585-592 (2017).
Wu Y., Ma D., Li Q.K., Stoica A.D., Song W.L., Wang H., Liu X.J., Stoica G.M., Wang G.Y., An K., Wang X.L., Li M., Lu Z.P., "Transformation-induced plasticity in bulk metallic glass composites evidenced by in-situ neutron diffraction", Acta Materialia, 124, 478-488 (2017).
Xie Q., Liang J., Stoica A.D., Yang P., Zhao Z., Wang J., Lan H., An K., "In-situ neutron diffraction study on the tension-compression fatigue behavior of a twinning induced plasticity steel", Scripta Materialia, 137, 83-87 (2017).
Yang H., Yu D., Chen Y., Mu J., Wang Y.D., An K., "In-situ TOF neutron diffraction studies of cyclic softening in superelasticity of a NiFeGaCo shape memory alloy", Materials Science and Engineering A, 680, 324-328 (2017).
Yang T., Wang J., Chen Y., An K., Ma D., Vogt T., Huang K., "A Combined Variable Temperature Neutron Diffraction and Thermogravimetric Analysis Study on a Promising Oxygen Electrode SrCo0.9Nb0.1O3-δ for Reversible Solid Oxide Fuel Cells", ACS Applied Materials & Interfaces, 9, 40, 34855–34864 (2017).
Zhang M., "Investigation of Cathodes for Next Generation High Energy: Lithium-ion Batteries and Post", Ph.D. Dissertation, University of California San Diego (2017).
Zhang X., Chen Z., Schwarz B., Sigel F., Ehrenberg H., An K., Zhang Z., Zhang Q., Li Y., Li J., "Kinetic characteristics up to 4.8 V of layered LiNi1\/3Co1\/3Mn1\/3O2 cathode materials for high voltage lithium-ion batteries", Electrochimica Acta, 227, 152-161 (2017).
2016 39 Publications
Aba-Perea P.E., Pirling T., Preuss M., "In-situ residual stress analysis during annealing treatments using neutron diffraction in combination with a novel furnace design", Materials & Design, 110, 925-931 (2016).
Aman A., "A multi-scale approach to study Solid Oxide Fuel Cells: from Mechanical Properties and Crystal Structure of the Cell's Materials to the Development of an Interactive and Interconnected Educational Tool", Ph.D. Dissertation, University of Central Florida (2016).
Bilheux H.Z., Song G., An K., Bilheux J., Stoica A.D., Kirka M.M., Dehoff R.R., Santodonato L., Gorti S.B., Radhakrishnan B., Xie Q., "Neutron Characterization of Additively Manufactured Inconel 718", Advanced Materials and Processes, 174, 8, 16-20 (2016).
Cakmak E., Kirka M.M., Watkins T.R., Cooper R.G., An K., Choo H., Wu W., Dehoff R.R., Babu S.S., "Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting", Acta Materialia, 108, 161–175 (2016).
Calhoun C., "Thermomechanical Response of Polycrystalline alpha-Uranium", Ph.D. Dissertation, University of Virginia (2016).
Chevali V., Summers P.T., Cholewa N., Khatibi A.A., Feih S., Lattimer B., Case S., Mouritz A., "Fire structural modelling and testing of welded aluminium plate", Fire and Materials, 40, 1, 48–64 (2016).
Gao P., "Anelastic Relaxation and Phase Transformations in Doped Binary Oxides", Ph.D. Dissertation, Texas A&M University College Station (2016).
Gao P., "Mg2(Si,Sn)-based thermoelectric materials and devices", Ph.D. Dissertation, Michigan State University (2016).
He J.Y., "Alloying effects on structure and mechanical properties of FeCoNiCr-based High Entropy Alloys", Ph.D. Dissertation, University of Science and Technology Beijing (2016).
He J.Y., Wang H., Huang H.L., Xu X.D., Chen M., Wu Y., Liu X.J., Nieh T.G., An K., Lu Z.P., "A precipitation-hardened high-entropy alloy with outstanding tensile properties", Acta Materialia, 102, 187-196 (2016).
Herringer S., "Archaeometallurgical Investigations of Copper Alloys Artifacts and Copper Smelting: Studies Utilizing Neutron Methods and Thermodynamic Modeling", Ph.D. Dissertation, Brown University (2016).
Jorgensen S.W., Johnson T.A., Payzant E.A., Bilheux H.Z., "Anisotropic storage medium development in a full-scale, sodium alanate-based, hydrogen storage system", International Journal of Hydrogen Energy, 41, 31, 13557–13574 (2016).
Kim D.K., Woo W.C., Hwang J.H., An K., Choi S.H., "Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction", Journal of Alloys and Compounds, 685, 281-286 (2016).
Liu H., "Diagnosing, Optimizing and Designing Ni and Mn based Layered oxides as Cathode Materials for Next Generation Li ion Batteries and Na ion Batteries", Ph.D. Dissertation, University of California San Diego (2016).
Liu H., Chen Y., Hy S., An K., Venkatachalam S., Qian D., Zhang M., Meng Y.S., "Operando Lithium Dynamics in the Li-Rich Layered Oxide Cathode Material via Neutron Diffraction", Advanced Energy Materials, 6, 7, 1502143 (2016).
Liu Q., Coakley J., Seidman D.N., Dunand D.C., "Precipitate Evolution and Creep Behavior of a W-Free Co-based Superalloy", Metallurgical and Materials Transactions A, 47, 12, 6090–6096 (2016).
Mauro N.A., Vogt A.J., Derendorf K.S., Johnson M.L., Rustan G.E., Quirinale D.G., Kreyssig A., Lokshin K.A., Neuefeind J., An K., Wang X.L., Goldman A.I., Egami T., Kelton K.F., "Electrostatic levitation facility optimized for neutron diffraction studies of high temperature liquids at a spallation neutron source", Review of Scientific Instruments, 87, 1, 013904 (2016).
Nicholson D.E., Bass M.A., Mabe J.H., Benafan O., Padula S.A., Vaidyanathan R., "Heating and Loading Paths to Optimize the Performance of Trained Shape Memory Alloy Torsional Actuators", ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, (2016).
Pramanick A., Stoica A.D., An K., "High-resolution 2-D Bragg diffraction reveal heterogeneous domain transformation behavior in a bulk relaxor ferroelectric", Applied Physics Letters, 109, 9, 092907 (2016).
Qiu B., "Mechanisms of Surface Modification and Energy Storage in Li-Rich Layered Oxide Cathode Materials", Ph.D. Dissertation, University of Chinese Academy of Science (2016).
Qiu B., Zhang M., Wu L., Wang J., Xia Y., Qian D., Liu H., Hy S., Chen Y., An K., Zhu Y., Liu Z., Meng Y.S., "Gas-solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries", Nature Communications, 7, 12108 (2016).
Radecka A., Coakley J., Jones I.P., Rugg D., Lindley T., Dye D., "Ordering and the micromechanics of Ti-7Al", Materials Science and Engineering A, 650, 28-37 (2016).
Ren F., Schmidt R., Keum J.K., Qian B., Case E.D., Littrell K.C., An K., "In situ neutron scattering study of nanoscale phase evolution in PbTe-PbS thermoelectric material", Applied Physics Letters, 109, 8, 081903 (2016).
Saleeb A.F., Vaidyanathan R., "A Computationally-Efficient, Multi-Mechanism Based Framework for the Comprehensive Modeling of the Evolutionary Behavior of Shape Memory Alloys", NASA NASA/CR—2016-219139 (2016).
Steiner M.A., Calhoun C., Klein R.W., An K., Garlea E., Agnew S.R., "α-Phase transformation kinetics of U - 8\u00a0wt% Mo established by in situ neutron diffraction", Journal of Nuclear Materials, 477, 149-156 (2016).
Tu S.Y., "Study on deformation behaviors of CoCrFeMnNi high entropy alloys", Master's Thesis, National Chiao Tung University (2016).
Usher T.M., "Local and Average Structures in Ferroelectrics under Perturbing Fields", Ph.D. Dissertation, North Carolina State University (2016).
Wang C.L., "Performance improvements of wavelength-shifting-fiber neutron detectors using high-resolution positioning algorithms", Review of Scientific Instruments, 87, 053303 (2016).
Wang C.L., Crow L., Funk L.L., Hannan B.W., Hodges J.P., Riedel R.A., "Optimizing ZnS\/6LiF scintillators for wavelength-shifting-fiber neutron detectors", 2015 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), (2016).
Wang H., Chen Y., Hood Z.D., Sahu G., Pandian A.S., Keum J.K., An K., Liang C., "An Air-Stable Na3SbS4 Superionic Conductor Prepared by a Rapid and Economic Synthetic Procedure", Angewandte Chemie International Edition, 55, 30, 8551–8555 (2016).
Wang Z., Stoica A.D., Ma D., Beese A.M., "Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction", Materials Science and Engineering A, 674, 406-412 (2016).
Wu W., An K., "Understanding Low-cycle Fatigue Life Improvement Mechanisms in a Pre-twinned Magnesium Alloy", Journal of Alloys and Compounds, 656, 539-550 (2016).
Wu W., Chuang C.P., Qiao D., Ren Y., An K., "Investigation of deformation twinning under complex stress states in a rolled magnesium alloy", Journal of Alloys and Compounds, 683, 619–633 (2016).
Wu W., Gao Y.F., Li N., Parish C.M., Liu W., Liaw P.K., An K., "Intragranular twinning, detwinning, and twinning-like lattice reorientation in magnesium alloys", Acta Materialia, 121, 15–23 (2016).
Yang H., "In-situ Neutron Diffraction Studies on Phase Transformation and Functional Behaviors of Ni(Mn)-Fe-Ga Ferromagnetic Shape Memory Alloys", Ph.D. Dissertation, Northeastern University China (2016).
Yang H., Chen Y., Bei H., dela Cruz C., Wang Y.D., An K., "Annealing effects on the structural and magnetic properties of off-stoichiometric Fe-Mn-Ga ferromagnetic shape memory alloys", Materials & Design, 104, 327–332 (2016).
Yang H., Wang Y.D., An K., "Thermal annealing effects on structural and magnetic properties of Fe46Mn26Ga28 ferromagnetic shape memory alloys", Advances in Computer Science Research Atlantis Press (2016).
Yu D., An K., Chen X., Bei H., "Phase-specific deformation behavior of a NiAl-Cr(Mo) lamellar composite under thermal and mechanical loads", Journal of Alloys and Compounds, 656, 481-490 (2016).
Zhou H., An K., Allu S., Pannala S., Li J., Bilheux H.Z., Martha S.K., Nanda J., "Probing Multiscale Transport and Inhomogeneity in a Lithium-Ion Pouch Cell Using In Situ Neutron Methods", ACS Energy Letters, 1, 981–986 (2016).
2015 16 Publications
Babu S.S., Love L.J., Dehoff R.R., Peter W.H., Watkins T.R., Pannala S., "Additive manufacturing of materials: Opportunities and challenges", MRS Bulletin, 40, 12, 1154-1161 (2015).
Bentzel G., Lane N.J., Vogel S.C., An K., Barsoum M.W., Caspi E., "A high-temperature neutron diffraction study of Nb2AlC and TiNbAlC", Journal of the American Ceramic Society, 98, 3, 940-947 (2015).
Cakmak E., Choo H., Kang J.Y., Ren Y., "Relationships Between the Phase Transformation Kinetics, Texture Evolution, and Microsturcture Development in a 304L Stainless Steel Under Biaxial Loading Conditions: Synchrotron X-ray and Electron Backscatter Diffraction Studies", Metallurgical and Materials Transactions A, 46, 5, 1860-1877 (2015).
Chen Y., Rangasamy E., dela Cruz C., Liang C., An K., "A Study of Suppressed Formation of Low-Conductive Phases in Doped Li7La3Zr2O12 Garnets by in-situ Neutron Diffraction", Journal of Materials Chemistry A, 3, 22868-22876 (2015).
Chen Y., Rangasamy E., Liang C., An K., "Origin of High Li+ Conduction in Doped Li7La3Zr2O12 Garnets", Chemistry of Materials, 27, 16, 5491–5494 (2015).
Dehoff R.R., Kirka M.M., Sames W.J., Bilheux H.Z., Tremsin A.S., Lowe L.E., Babu S.S., "Site specific control of crystallographic grain orientation through electron beam additive manufacturing", Materials Science and Technology, 31, 8, 931 (2015).
Guo X.Q., Wu P.D., Wang H., Mao X.B., "Study of Lattice Strain Evolution in Stainless Steel Under Tension: The Role of Self-Consistent Plasticity Model", Steel Research International, 86, 8, 894–901 (2015).
He Y., Wang H., "In-situ Neutron Techniques for Lithium Ion and Solid-State Rechargeable Batteries", Handbook of Solid State Batteries, edited by Nancy J Ddney, William C West, and Jagit Nanda World Scientific (2015).
Huang E., Yu D., Yeh J.W., Lee C., An K., Tu S.Y., "A study of lattice elasticity from low entropy metals to medium and high entropy alloys", Scripta Materialia, 101, 32-35 (2015).
Huang S., Gao Y.F., An K., Zheng L.L., Wu W., Teng Z., Liaw P.K., "Deformation mechanisms in a precipitation-strengthened ferritic superalloy revealed by in situ neutron diffraction studies at elevated temperatures", Acta Materialia, 83, 137-148 (2015).
Johnson M.L., "Structural Evolution, Chemical Order, and Crystallization of Metallic Liquids and Glasses", Ph.D. Dissertation, Washington University in St Louis (2015).
Liu H., Qian D., Verde M.G., Zhang M., Baggetto L., An K., Chen Y., Carroll K.J., Lau D., Chi M., Veith G.M., Meng Y.S., "Understanding the Role of NH4F and Al2O3 Surface Co-Modification on Lithium-excess Layered Oxide Li1.2Ni0.2Mn0.6O2", ACS Applied Materials & Interfaces, 7, 34, 19189–19200 (2015).
McClanahan T.C., Gallmeier F.X., Iverson E.B., "SAC Activation Analysis and Validation", Oak Ridge National Laboratory ORNL/TM-2015/360 (2015).
Radecka A., "Ordering and the deformation mechanisms of Ti-Al alloys", Ph.D. Dissertation, Imperial College-London (2015).
Wu W., Liaw P.K., An K., "Unraveling cyclic deformation mechanisms of a rolled magnesium alloy using in situ neutron diffraction", Acta Materialia, 85, 343-353 (2015).
Xu G.L., Qin Y., Ren Y., Cai L., An K., Amine K., Chen Z., "Migration Mechanism of Transition Metal Ions in LiNi0.5Mn1.5O4", Journal of Materials Chemistry A, 3, 13031-13038 (2015).
2014 30 Publications
Aman A., Chen Y., Lugovy M., Orlovskaya N., Reece M.J., Ma D., Stoica A.D., An K., "In-situ neutron diffraction of LaCoO3 perovskite under uniaxial compression. I. Crystal structure analysis and texture development", Journal of Applied Physics, 116, 013503 (2014).
Benafan O., Padula S.A., Skorpenske H.D., An K., Vaidyanathan R., "Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer", Review of Scientific Instruments, 85, 10, 103901 (2014).
Bo S.H., "Transition Metal Borates as Cathode Materials for Rechargeable Batteries", Ph.D. Dissertation, State University of New York at Stony Brook (2014).
Cakmak E., "Investigation of the Phase Transformation Kinetics and Texture Evolution in a TRIP Steel under Complex Loads", Ph.D. Dissertation, University of Tennessee (2014).
Chen Y., Yang L., Ren F., An K., "Visualizing the Structual Evolution of LSM\/xYSZ Composite Cathodes for SOFE by in-situ Neutron Diffraction", Scientific Reports, 4, 5179 (2014).
Druschitz A., Ostrander M., Aristizabal R.E., "The science of intercritically austempered ductile iron", International Foundry Research/Giesserei forschung, 66, 4, 30-42 (2014).
Lee S.Y., Skorpenske H.D., Stoica A.D., An K., Wang X.L., Noyan I.C., "Measurement of Interface Thermal Resistance with Neutron Diffraction", Journal of Heat Transfer, 136, 3, 031302 (2014).
Lee S.Y., Wang H., Gharghouri M.A., Nayyeri G., Woo W.C., Shin E., Wu P.D., Poole W.J., Wu W., An K., "Deformation behavior of solid-solution-strengthened Mg-9 wt.% Al alloy: In situ neutron diffraction and elastic-viscoplastic self-consistent modeling", Acta Materialia, 73, 139-148 (2014).
Lee S.Y., Woo W.C., Gharghouri M.A., Yoon C., An K., "Micromechanical behavior of solid-solution-strengthened Mg-1wt.%Al alloy investigated by in-situ neutron diffraction", Materials Science Forum, 777, 130-135 (2014).
Lugovy M., Aman A., Chen Y., Orlovskaya N., Kuebler J., Graule T., Reece M.J., Ma D., "In-situ neutron diffraction of LaCoO3 perovskite under uniaxial compression. II. Elastic properties", Journal of Applied Physics, 116, 013504 (2014).
Polsky Y., "Raw neutron scattering data for strain measurement of hydraulically loaded granite and marble samples in triaxial stress state", Rep. No. 442 (2014).
Polsky Y., Anovitz L.M., An K., Dessieux L., "Strain measurement of geological samples subjected to triaxial stresses experienced during hydraulic loading", 39th Workshop on Geothermal Reservoir Engineering, Proceedings of the 39th Workshop on Geothermal Reservoir Engineering, (2014).
Rustan G.E., "Electrostatic levitation studies of supercooled liquids and metastable solid phases", Ph.D. Dissertation, Iowa State University (2014).
Sahu G., Rangasamy E., Li J.C., Chen Y., An K., Dudney N.J., Liang C., "A High-Conduction Ge Substituted Li3AsS4 Solid Electrolyte with Exceptional Low Activation Energy", Journal of Materials Chemistry A, 2, 27, 10396-10403 (2014).
Stoica G.M., Stoica A.D., An K., Ma D., Vogel S.C., Carpenter J.M., Wang X.L., "Extracting grain-orientation-dependent data from in situ time-of-flight neutron diffraction. I. Inverse pole figures", Journal of Applied Crystallography, 47, 6, 2019-2029 (2014).
Stoica G.M., Stoica A.D., Miller M.K., Ma D., "Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy", Nature Communications, 5, 5178 (2014).
Sueyoshi H., Ishikawa N., Inoue H., Hiraoka K., Kasuya T., An K., Skorpenske H.D., "Analysis of Retained Austenite and Residual Stress Distribution in Ni-Cr Type High Strength Steel Weld by Neutron Diffraction", THERMEC 2013: International Conference on Processing & Manufacturing of Advanced Materials, MSF.783-786.2115, (2014).
Tang Z., "Fatigue, Fracture, and Environmentally-Assisted Behavior of Advanced Engineering Materials", Ph.D. Dissertation, University of Tennessee (2014).
Ungar T., Stoica A.D., Tichy G., Wang X.L., "Orientation-dependent evolution of the dislocation density in grain populations with different crystallographic orientations relative to the tensile axis in a polycrystalline aggregate of stainless steel", Acta Materialia, 66, 251-261 (2014).
Vadlamani B.S., An K., Jagannathan M., Chandran R.K., "An In-Situ Electrochemical Cell for Neutron Diffraction Studies of Phase Transiitons in Small Volume Electrodes of Li-Ion", Journal of the Electrochemical Society, 161, 10, A1731-A1741 (2014).
Vogt A.J., "Studies of Structural and Chemical Ordering in Metallic Liquids and Glasses Using Electrostatic Levitation", Ph.D. Dissertation, Washington University in St Louis (2014).
Wang S., Chen Y., Fang S., Zhang L., Tang M., An K., Brinkman K.S., Chen F., "Novel chemically stable Ba3Ca1.18Nb1.82-xYxO9-sigma proton conductor: improved proton conductivity through tailored cation ordering", Chemistry of Materials, 26, 6, 2021-2019 (2014).
Wu W., Qiao H., An K., Guo X.Q., Wu P.D., Liaw P.K., "Investigation of Deformation Dynamics in a Wrought Magnesium Alloy", International Journal of Plasticity, 62, 105-120 (2014).
Wu Y., Liu W.H., Wang X.L., Ma D., Stoica A.D., Nieh T.G., He Z.B., Lu Z.P., "In-situ neutron diffraction study of deformation behavior of a multi-component high-entropy alloy", Applied Physics Letters, 104, 051910 (2014).
Xiao G., Wang S., Lin Y., Zhang Y., An K., Chen F., "Releasing Metal Catalysts via Phase Transition: (NiO)0.05- (SrTi0.8Nb0.2O3)0.95 as a Redox Stable Anode Material for Solid Oxide Fuel Cells", Applied Materials & Interfaces, 6, 22, 19990–19996 (2014).
Yan H., "Co-Al-W based alloys for turbine disc applications", Ph.D. Dissertation, Imperial College-London (2014).
Yan H., Coakley J., Vorontsov V., Jones N.G., Stone H.J., Dye D., "Alloying and the micromechanics of Co-Al-W-X quaternary alloys", Materials Science and Engineering A, 613, 201-208 (2014).
Yu D., "A Study of Micro-Mechanisms and Macro-Constitutive Modeling of the Cyclic Plasticity of Austenitic Stainless Steels", Ph.D. Dissertation, Tianjin University (2014).
Yu D., An K., Chen Y., Chen X., "Revealing the cyclic hardening mechanism of an austenitic stainless steel by real-time in situ neutron diffraction", Scripta Materialia, 89, 45–48 (2014).
Yu D., Bei H., Chen Y., George E.P., An K., "Phase-specific deformation behavior of a relatively tough NiAl-Cr(Mo) lamellar composite", Scripta Materialia, 84-85, 59-62 (2014).
2013 29 Publications
Benafan O., Noebe R.D., Padula S.A., Gaydosh D.J., Lerch B.A., Garg A., Bigelow G.S., An K., Vaidyanathan R., "Temperature dependent behavior of a polycrystalline NiTi shape memory alloy around the transformation regime", Scripta Materialia, 68, 8, 571-574 (2013).
Benafan O., Noebe R.D., Padula S.A., Lerch B.A., Bigelow G.S., Gaydosh D.J., Garg A., An K., Vaidyanathan R., "Macroscopic and microstructural aspects of the transformation behavior in a polycrystalline NiTi shape memory alloy", NASA Glenn Research Center NASA/TM-2013-217878 (2013).
Bowman Jr R.C., Payzant E.A., Wilson P.R., Pearson D.P., Ledovskikh A., Danilov D., Notten P.H., An K., Skorpenske H.D., Wood D.L., "Characterization and analyses of degradation and recovery of LaNi4.78Sn0.22 hydrides following thermal aging", Journal of Alloys and Compounds, 580, S207-S210 (2013).
Brice C.A., Hofmeister W.H., "Determination of bulk residual stresses in electron beam additive manufactured aluminum", Metallurgical and Materials Transactions A, 44, 11, 5147-5153 (2013).
Butler L.G., Lehmann E.H., Schillinger B., "Neutron radiography, tomography, and diffraction of commercial lithium-ion polymer batteries", Physics Procedia, 43, 331-336 (2013).
Cai L., An K., Feng Z., Liang C., Harris S.J., "In-situ observation of inhomogeneous degradation in large format Li-ion cells by neutron diffraction", Journal of Power Sources, 236, 163-168 (2013).
Cai L., Liu Z., An K., Liang C., "Unraveling structural evolution of LiNi0.5Mn1.5O4 by in-situ neutron diffraction", Journal of Materials Chemistry A, 1, 23, 6908-6914 (2013).
Chen B., "Fatigue study of pipeline steels", Master's Thesis, University of Tennessee (2013).
Derendorf K.S., "The Design, Construction, and Implementation of an Electrostatic Levitation Facility for Neutron Scattering Studies of Liquids", Ph.D. Dissertation, Washington University in St Louis (2013).
Guo X.Q., Wu W., Wu P.D., Qiao H., An K., Liaw P.K., "On the Swift effect and twinning in a rolled magnesium alloy under free-end torsion", Scripta Materialia, 69, 4, 319-322 (2013).
Huang Y., "Molecular Dynamics Study for Plastic Deformation of the Nano- Precipitate Strengthened Ni-base Alloy", Master's Thesis, National Central University (2013).
Liu H., Fell C.R., An K., Cai L., Meng Y.S., "In-situ neutron diffraction study of the xLi2MnO3.(1-x)LiMO2 (x= 0, 0.5; M= Ni, Mn, Co) layered oxide compounds during electrochemical cycling", Journal of Power Sources, 240, 772-778 (2013).
Ludtka G.M., Ludtka G.M., Rios O., Wilgen J.B., Parish C.M., Rogers H., Kisner R.A., Nicholson D.M., Watkins T.R., Stoica A.D., White D., Murphy B.L., "Magnetic processing of steel strip and next generation alloys", Oak Ridge National Laboratory, Oak Ridge, TN ORNL/TM-2012/608 (2013).
Maurya D., Murayama M., Pramanick A., Reynolds W.T., An K., Priya S., "Origin of high piezoelectric response in A-site disordered morphotropic phase boundary composition of lead-free piezoelectric 0.93(Na0.5Bi0.5)TiO3-0.07BaTiO3", Journal of Applied Physics, 113, 114101 (2013).
Payzant E.A., Bowman Jr R.C., Johnson T.A., Jorgensen S.W., "In-situ chemistry mapping of hydrogen storage materials by neutron diffraction", Materials Science and Technology (MS&T), ISBN 978-0-87339-762-9, pp. 996-1003, (2013).
Polsky Y., Dessieux L., An K., Anovitz L.M., Bingham P., Carmichael J., "Development of a neutron diffraction based experimental capability for investigating hydraulic fracturing for EGS-like conditions", Thirty-Eighth Workshop on Geothermal Reservoir Engineering, (2013).
Polsky Y., Dessieux L., An K., Anovitz L.M., Bingham P., Carmichael J., "Development of a neutron diffraction-based strain measurement capability for triaxial loading conditions", 47th US Rock Mechanics / Geomechanics Symposium, (2013).
Pramanick A., Wang X.L., "Characterization of magnetoelastic coupling in ferromagnetic shape memory alloys using neutron diffraction", JOM, 65, 1, 54-64 (2013).
Wang C.L., Clonts L., Diawara Y., Hannan B.W., Hodges J.P., "Elimination of ghosting artifacts from wavelength-shifting fiber neutron detectors", Review of Scientific Instruments, 84, 013308 (2013).
Wang H., Clausen B., Tome C.N., Wu P.D., "Studying the effect of stress relaxation and creep on lattice strain evolution of stainless steel under tension", Acta Materialia, 61, 4, 1179-1188 (2013).
Wang S., "Preparation, characterization and application of novel proton conducting ceramics", Ph.D. Dissertation, University of South Carolina (2013).
Watkins T.R., Bilheux H.Z., An K., Payzant E.A., Dehoff R.R., Duty C.E., Peter W.H., Blue C.A., Brice C.A., "Neutron characterization for additive manufacturing", Advanced Materials and Processes, 171, 3, 23-27 (2013).
Wei W., "Understanding mechanical and fatigue behavior of a wrought magnesium alloy using in-situ neutron and sychrotron X-ray diffraction", Ph.D. Dissertation, University of Tennessee (2013).
Wu W., An K., Huang L.K., Lee S.Y., Liaw P.K., "Deformation dynamics study of a wrought magnesium alloy by real-time in situ neutron diffraction", Scripta Materialia, 69, 5, 358-361 (2013).
Yu Z.Z., Feng Z., An K., Zhang W., Specht E., Chen J., Wang X.L., David S.A., "In-situ neutron diffraction study of non-equilibrium phase transformation in advanced high-strength steels", 9th International Conference on Trends in Welding Research, Proceedings of the 9th International Conference on Trends in Welding Research, (2013).
Yu Z.Z., Feng Z., An K., Zhang W., Specht E., Chen J., Wang X.L., David S.A., "Measurement of steel phase transformation kinetics by dilatometry and in-situ neutron diffraction - a comparative study", 9th International Conference on Trends in Welding Research, Proceedings of the 9th International Conference on Trends in Welding Research, (2013).
Yu Z.Z., Feng Z., Woo W.C., David S.A., "Application of in situ neutron diffraction to characterize transient material behavior in welding", JOM, 65, 1, 65-72 (2013).
Zhang Z.W., Liu C.T., Miller M.K., Wang X.L., Wen Y., Fujita T., Hirata A., Chen M., Chen G., Chin B.A., "A nanoscale co-precipitation approach for property enhancement of Fe-base alloys", Scientific Reports, 3, 1327 (2013).
Zheng L.L., Gao Y.F., Wang Y.D., Stoica A.D., An K., Wang X.L., "Grain orientation dependence of lattice strains and intergranular damage rates in polycrystals under cyclic loading", Scripta Materialia, 68, 5, 265-268 (2013).
2012 13 Publications
Banerjee S., "Effect of chemistry on the transformation of austenite to martensite for intercritically austempered ductile iron", Master's Thesis, Virginia Polytechnic Institute & State University (2012).
Cai L., Liu Z., An K., Liang C., "Probing Li-Ni cation disorder in Li1-xNi1+x-yAlyO2 cathode materials by neutron diffraction", Journal of the Electrochemical Society, 159, 7, A924 (2012).
Cakmak E., Choo H., An K., Ren Y., "A synchrotron X-ray diffraction study on the phase transformation kinetics and texture evolution of a TRIP steel subjected to torsional loading", Acta Materialia, 60, 19, 6703-6713 (2012).
Cornwell P.A., Bunn J.R., Schmidlin J.E., Hubbard C.R., "Laboratory guide for residual stress sample alignment and experimental planning - October 2011 version", Oak Ridge National Laboratory, Oak Ridge, TN ORNL/TM-2011/460 (2012).
Lee S.Y., Gharghouri M.A., Wang H., Nayyeri G., Wu P.D., Poole W.J., Wu W., An K., "Deformation behavior of solid-solution-strengthened Mg-9Wat.%Al alloy subjected to uniaxial tension", 9th International Conference on Magnesium Alloys and their Applications, MG2012: Proceedings of the 9th International Conference on Magnesium Alloys and their Applications, (2012).
Maurya D., Pramanick A., An K., Priya S., "Enhanced piezoelectricity and nature of electric-field induced structural phase transformation in textured lead-free piezoelectric Na0.5Bi0.5TiO3-BaTiO3 ceramics", Applied Physics Letters, 100, 172906 (2012).
Pramanick A., Jones J.L., Tutuncu G., Ghosh D., Stoica A.D., An K., "Strain incompatibility and residual strains in ferroelectric single crystals", Scientific Reports, 2, 929 (2012).
Pramanick A., Wang X.P., An K., Stoica A.D., Yi J., Gai Z., Hoffmann C., Wang X.L., "Structural modulations and magnetic properties of off-stoichiometric Ni-Mn-Ga magnetic shape memory alloys", Physical Review B, 85, 144412 (2012).
Radhakrishnan B., Gorti S.B., Stoica G.M., Muralidharan G., Stoica A.D., Wang X.L., Specht E., Kenik E.A., Muth T., "Mesoscale modeling and validation of texture evolution during asymmetric rolling and static recrystallization of magnesium alloy AZ31B", Metallurgical and Materials Transactions A, 43, 5, 1509-1516 (2012).
Wang X.L., An K., Cai L., Feng Z., Nagler S.E., Daniel C., Rhodes K.J., Stoica A.D., Skorpenske H.D., Liang C., Zhang W., Kim J., Qi Y., Harris S.J., "Visualizing the chemistry and structure dynamics in lithium-ion batteries by in-situ neutron diffraction", Scientific Reports, 2, 747 (2012).
Wang X.L., Liu C.T., Keiderling U., Stoica A.D., Yang L., Miller M.K., Fu C.L., Ma D., An K., "Unusual thermal stability of nano-structured ferritic alloys", Journal of Alloys and Compounds, 529, 96-101 (2012).
Wu S.Y., "Strain-rate-effect on the lattice-strain evolution in polycrystalline nickel alloy", Master's Thesis, National Central University Taiwan (2012).
Zhang Z.W., Liu C.T., Wang X.L., Miller M.K., Ma D., Chen G., Williams J.R., Chin B.A., "Effects of proton irradiation on nanocluster precipitation in ferritic steel containing fcc alloying additions", Acta Materialia, 60, 6-7, 3034-3046 (2012).
2011 8 Publications
An K., Skorpenske H.D., Stoica A.D., Ma D., Wang X.L., Cakmak E., "First in situ lattice strains measurements under load at VULCAN", Metallurgical and Materials Transactions A, 42, 1, 95-99 (2011).
Huang S., "Computational and experimental study of structure-property relationships in NiAl precipitate-strengthened ferritic superalloys", Ph.D. Dissertation, University of Tennessee (2011).
Liu Z., "Micromechanical behavior investigation of metallic glasses", Ph.D. Dissertation, Hong Kong Polytechnic University (2011).
Liu Z., Guo S., Liu X.J., Ye J., Yang Y., Wang X.L., Yang L., An K., Liu C.T., "Micromechanical characterization of casting induced inhomogeneity in an Al0.8CoCrCuFeNi high entropy alloy", Scripta Materialia, 64, 9, 868-871 (2011).
Ma D., Stoica A.D., An K., Yang L., Bei H., Mills R.A., Skorpenske H.D., Wang X.L., "Texture evolution and phase transformation in titanium investigated by in-situ neutron diffraction", Metallurgical and Materials Transactions A, 42A, 6, 1444-1448 (2011).
Pramanick A., An K., Stoica A.D., Wang X.L., "In situ neutron diffraction study of twin reorientation and pseudoplastic strain in Ni-Mn-Ga single crystal", Scripta Materialia, 65, 6, 540-543 (2011).
Zhang Z.W., Liu C.T., Wang X.L., Littrell K.C., Miller M.K., An K., Chin B.A., "From embryos to precipitates: a study of nucleation and growth in a multicomponent ferritic steel", Physical Review B, 84, 174114 (2011).
Zheng L.L., "Micromechanical Studies of Intergranular Strain and Lattice Misorientation Fields and Comparisons to Advanced Diffraction Measurements", Ph.D. Dissertation, University of Tennessee (2011).
2010 1 Publications
Wang X.L., Holden T.M., Stoica A.D., An K., Skorpenske H.D., Jones A.B., Rennich G.Q., Iverson E.B., "First results from the VULCAN diffractometer at the SNS", In Materials Science Forum, 652, 105-110 (2010).
2009 1 Publications
Wang X.L., Stoica A.D., "Focusing neutron guides for VULCAN-design aspects, estimated performance, and detector deployment", Nuclear Instruments and Methods in Physics Research Section A, 600, 1, 309-312 (2009).
CONNECT WITH US
Oak Ridge National Laboratory is managed by UT-Battelle LLC for the US Department of Energy